0.407 in. Diameter x 1.039 in. Length of Cut x 80 mm Overall Length GMX-35 Coated Carbide 2X Coolant 4 Flutes 1/2-13 UN Threadmill

Item Code: GMTMAC12-13UN4FL2X

0.157 in. Diameter x 0.787 in. Length of Cut x 2.50 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 3 Flutes 1/4-20 UN Threadmill

Item Code: GMDTTM14-20UN3FL

0.496 in. Diameter x 1.278 in. Length of Cut x 3.50 in. Overall Length GMX-35 Coated Carbide 2X Solid 4 Flutes 5/8-18 UN Threadmill

Item Code: GMTM58-18UN4FL

0.504 in. Diameter x 1.969 in. Length of Cut x 4.00 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 4 Flutes 5/18-18 UN Threadmill

Item Code: GMDTTM58-18UN4FL

0.35 in. Diameter x 1.575 in. Length of Cut x 3.50 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 4 Flutes 1/2-13 UN Threadmill

Item Code: GMDTTM12-13UN4FL

0.398 in. Diameter x 1.575 in. Length of Cut x 3.50 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 4 Flutes 1/2-20 UN Threadmill

Item Code: GMDTTM12-20UN4FL

0.181 in. Diameter x 0.787 in. Length of Cut x 2.50 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 3 Flutes 1/4-28 UN Threadmill

Item Code: GMDTTM14-28UN3FL

0.531 in. Diameter x 2.362 in. Length of Cut x 5.00 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 5 Flutes 3/4-10 UN Threadmill

Item Code: GMDTTM34-10UN5FL

0.61 in. Diameter x 2.362 in. Length of Cut x 5.00 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 5 Flutes 3/4-16 UN Threadmill

Item Code: GMDTTM34-16UN5FL

0.264 in. Diameter x 1.181 in. Length of Cut x 3.00 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 3 Flutes 3/8-16 UN Threadmill

Item Code: GMDTTM38-16UN3FL

0.291 in. Diameter x 1.181 in. Length of Cut x 3.00 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 3 Flutes 3/8-24 UN Threadmill

Item Code: GMDTTM38-24UN3FL

0.205 in. Diameter x 0.984 in. Length of Cut x 3.00 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 3 Flutes 5/16-18 UN Threadmill

Item Code: GMDTTM516-18UN3FL

0.224 in. Diameter x 0.984 in. Length of Cut x 3.00 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 3 Flutes 5/16-24 UN Threadmill

Item Code: GMDTTM516-24UN3FL

0.433 in. Diameter x 1.969 in. Length of Cut x 4.00 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 4 Flutes 5/8-11 UN Threadmill

Item Code: GMDTTM58-11UN4FL

0.299 in. Diameter x 1.378 in. Length of Cut x 3.50 in. Overall Length GMX-35 Coated Carbide Deep Thread Single Pitch 4 Flutes 7/16-14 UN Threadmill

Item Code: GMDTTM716-14UN4FL