1 Inch Dia. x 1 Inch W x 5/8 Inch I.D., Crown Face, 70 D Urethane Contact Wheel Assembly

Item Code: 14251-DYNABRADE

1-1/4 Inch Dia. x 1 Inch W x 5/8 Inch I.D., Crown Face, 70 D Urethane Contact Wheel Assembly

Item Code: 14252-DYNABRADE

1-1/2 Inch Dia. x 1 Inch W x 5/8 Inch I.D., Crown Face, 70 D Urethane Contact Wheel Assembly

Item Code: 14253-DYNABRADE

1-3/4 Inch Dia. x 1 Inch W x 5/8 Inch I.D., Crown Face, 70 D Urethane Contact Wheel Assembly

Item Code: 14254

2 Inch Dia. x 1 Inch W x 5/8 Inch I.D., Crown Face, 70 D Urethane Contact Wheel Assembly

Item Code: 14255-DYNABRADE

2 Inch Dia. x 1 Inch W x 5/8 Inch I.D., Standard Face, 70 Duro Rubber Contact Wheel Assembly

Item Code: 14256-DYNABRADE

2.4 hp, Straight-Line, 13,000 RPM, Rear Exhaust, for 2 Inch W x 34 Inch L (51 mm x 864 mm) Belts, Dynangle II Abrasive Belt Tool, Dual Motor w/Platen

Item Code: 14303-DYNABRADE

2.4 hp, Straight-Line, 13,000 RPM, Rear Exhaust, for 2 Inch W x 45 Inch L (51 mm x 1143 mm) Belts, Dynangle II Abrasive Belt Tool, Dual Motor w/Platen

Item Code: 14306-DYNABRADE

5/8 Inch Dia. x 1/8 Inch W, Rubber Wheel, with 1/4 Inch (6 mm) W Platen, Contact Arm Assemlby for 1/4 Inch (56 mm) W x 12 Inch (305 mm) L Belts

Item Code: 15027

5/16 Inch Dia. x 3/8 Inch W, Steel Wheel, with 1/2 Inch (13 mm) W Platen, Contact Arm Assembly for 1/2 Inch (13 mm) W x 12 Inch (305 mm) L Belts

Item Code: 15030-DYNABRADE

1/4 Inch Dia. x 3/8 Inch W, Crowned Steel Wheel, Run at 45 PSI Maximum, Contact Arm Assembly for 1/2 Inch (13 mm) W x 12 Inch (305 mm) L Belts

Item Code: 15032-DYNABRADE

3/4 Inch Dia. x 7/8 Inch W x 3/8 Inch I.D., Crown Face, 70 Duro Rubber Contact Wheel

Item Code: 15318-DYNABRADE

3/4 Inch Dia. x 7/8 Inch W x 3/8 Inch I.D., Crown Face, 70 Duro Rubber Contact Wheel Assembly

Item Code: 15320-DYNABRADE

7/8 Inch (22 mm) Dia. x 3/4 Inch (19 mm) W, Contact Arm Assembly for 1 Inch (25 mm) W x 18 Inch (457 mm) L Belts

Item Code: 15321-DYNABRADE

7/8 Inch (22 mm) Dia. x 3/4 Inch (19 mm) W, Contact Arm Assembly for 1 Inch (25 mm) W x 24 Inch (610 mm) L Blets

Item Code: 15326

2 Inch Dia. x 5/8 Inch W x 5/8 Inch I.D., Crown Face, 40 Duro Rubber Contact Wheel

Item Code: 15342-DYNABRADE

2 Inch Dia. x 1 Inch W x 5/8 Inch I.D., V-Shaped Face, 70 Duro Rubber Contact Wheel

Item Code: 15343

2 Inch Dia. x 5/8 Inch W x 5/8 Inch I.D., Crown Face, 40 Duro Rubber Contact Wheel Assembly

Item Code: 15346-DYNABRADE

2 Inch Dia. x 1 Inch W x 5/8 Inch I.D., Standard Face, 70 Duro Rubber Contact Wheel Assembly

Item Code: 15348-DYNABRADE

2 Inch Dia. x 1 Inch W x 5/8 Inch I.D., Flat Face, 90 Duro Rubber Contact Wheel Assembly

Item Code: 15349-DYNABRADE

1 Inch (25 mm) Dia. x 2 Inch (51 mm) W, Serrated Wheel, Contact Arm Assembly for 1 Inch (25 mm) W x 18 Inch (457 mm) L Belts

Item Code: 15351-DYNABRADE

5/8 Inch (16 mm) Dia. x 2 Inch (51 mm) W, Serrated Wheel, Contact Arm Assembly for 1 Inch (25 mm) W x 18 Inch (457 mm) L Belts

Item Code: 15356-DYNABRADE

1 Inch Dia. x 1 Inch W x 5/8 Inch I.D., Flat Face, 70 Duro Rubber Contact Wheel

Item Code: 15358-DYNABRADE

1 Inch Dia. x 1 Inch W x 5/8 Inch I.D., Flat Face, 70 Duro Rubber Contact Wheel Assembly

Item Code: 15359-DYNABRADE

.7 hp, 7° Offset, 20,000 RPM, Front Exhaust, 5/8 Inch, 3/4 Inchx20-1/2 Inch L (13 mm,19 mm x 521 mm) Belts, Dynafile III Abrasive Belt Tool

Item Code: 15401-DYNABRADE

.7 hp, Straight-Line, 2,400 RPM, Rear Exhaust, 2 Inch (51 mm) W Roto Peen Hub, Dynascaler Surface Preparation Tool, Hand-Held

Item Code: 30304-DYNABRADE

.7 hp, Right Angle, 1,950 RPM, Rear Exhaust, 2 Inch (51 mm) W, Dynascaler Surface Preparation Tool, Hand-Held

Item Code: 30337

.5 hp, 7° Offset, 20,000 RPM, Front Exhaust, for 1/4-3/4 Inch W x 18 Inch L (6-19 mm x 457 mm) Belts, Dynafile II Abrasive Belt Tool Versatility Kit, Metric Collet

Item Code: 40324-DYNABRADE

.5 hp, 7° Offset, 20,000 RPM, Front Exhaust, 1/4-3/4 Inch W x 18-24 Inch L (6-19 mm x 457-610 mm) Belt, Vacuum Dynafile II Abrasive Belt Tool

Item Code: 40330-DYNABRADE

.4 hp, 7° Offset, 25,000 RPM, Front Exhaust, for 1/8-3/4 Inch W x 18 Inch L (3-19 mm x 457 mm) Belts, Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts

Item Code: 40353-DYNABRADE

.4 hp, 7° Offset, 5,000 RPM, Front Exhaust, for 1/4-3/4 Inch W x 18 Inch L (6-19 mm x 457 mm) Belts, Dynafile II Abrasive Belt Tool, Slow Speed

Item Code: 40381

Electric Dynafile II Abrasive Belt Tool Versatility Kit, 11,000 RPM, 120 V (AC), 7 Amp, 60 Hz, for 1/8-3/4 Inch W x 18-34 Inch L (3-19 mm x 457-864 mm) Belts

Item Code: 40611-DYNABRADE

3/4 Inch Dia. x 5/8 Inch W x 3/8 Inch I.D., Crown Face, 70 Duro Rubber Contact Wheel Assembly

Item Code: 42652

5/8 Inch Dia. x 3/8 Inch W x 3/8 Inch I.D., Crown Face, 70 Duro Rubber Contact Wheel Assembly

Item Code: 42653

1 Inch Dia. x 3/8 Inch W x 3/8 Inch I.D., Round Radiused Face, 70 Duro Rubber Contact Wheel Assembly

Item Code: 42654

3 Inch (76 mm) Extention Die Grinder, 25,000 RPM, Gearless, Front Exhaust, 1/4 Inch & 6 mm Collets

Item Code: 43500

3 Inch (76 mm) Extention Die Grinder, 25,000 RPM, Gearless, Rear Exhaust, 1/4 Inch & 6 mm Collets, Extended Muffler

Item Code: 43505

6 Inch (152 mm) Extention Die Grinder, 25,000 RPM, Gearless, Front Exhaust, 1/4 Inch & 6 mm Collets

Item Code: 43510-DYNABRADE

6 Inch (152 mm) Extention Die Grinder, 25,000 RPM, Gearless, Rear Exhaust, 1/4 Inch & 6 mm Collets, Extended Muffler

Item Code: 43515

.4 hp Right Angle Die Grinder (Replaces 50000 and 50003), 12,000 RPM, Spiral-Geared, Extended Rear Exhaust, 1/4 Inch Collet

Item Code: 46000-DYNABRADE

.4 hp Right Angle Die Grinder (Replaces 50001 and 50004), 15,000 RPM, Spiral-Geared, Extended Rear Exhaust, 1/4 Inch Collet

Item Code: 46001

.4 hp Straight-Line Die Grinder (Replaces 51200 and 51203), 950 RPM, Planetary-Geared, Rear Exhaust, 1/4 Inch & 6 mm Collets, Extended Muffler

Item Code: 47200-DYNABRADE

.4 hp Straight-Line Die Grinder (Replaces 51201 and 51204), 3,200 RPM, Planetary-Geared, Rear Exhaust, 1/4 Inch & 6 mm Collets, Extended Muffler

Item Code: 47201

.4 hp 7° Offset Die Grinder (Replaces 51211 and 51214), 3,200 RPM, Planetary-Geared, Extended Rear Exhaust, 1/4 Inch & 6mm Collets

Item Code: 47211-DYNABRADE

.4 hp 7° Offset Die Grinder (Replaces 51212 and 51215), 5,000 RPM, Planetary-Geared, Extended Rear Exhaust, 1/4 Inch & 6mm Collets

Item Code: 47212-DYNABRADE

.4 hp Right Angle Die Grinder (Replaces 51800 and 51803), 12,000 RPM, Spiral-Geared, Front Exhaust, 1/4 Inch & 6mm Collets

Item Code: 47800

.4 hp Right Angle Die Grinder (Replaces 51801 and 51804), 15,000 RPM, Spiral-Geared, Front Exhaust, 1/4 Inch & 6mm Collets

Item Code: 47801

.4 hp, 12,000 RPM, Geared, Front Exhaust, Locking-Type Female Pad, 2 Inch (51 mm) Dia. Right Angle Disc Sander (Replaces 51820)

Item Code: 47820-DYNABRADE

.4 hp, 15,000 RPM, Geared, Front Exhaust, Locking-Type Female Pad, 2 Inch (51 mm) Dia. Right Angle Disc Sander (Replaces 51821)

Item Code: 47821

0.4 hp (298 W) , 7° Offset, 15,000 RPM, 1/32 Inch (1 mm) Dia. Orbit, Extended Rear Exhaust, Dynafine Scraper

Item Code: 47915