0.5000 in. (1/2) Cutter Diameter x 0.0100 in. Radius x 1.0000 in. (1) Length of Cut 5 Flutes ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC21338

0.5000 in. (1/2) Cutter Diameter x 0.0200 in. Radius x 1.0000 in. (1) Length of Cut 5 Flutes ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC21339

0.6250 in. (5/8) Cutter Diameter x 0.0200 in. Radius x 1.6250 in. (1-5/8) Length of Cut 5 Flutes ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC21340

0.7500 in. (3/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.6250 in. (1-5/8) Length of Cut 5 Flutes ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC21341

0.5000 in. (1/2) Cutter Diameter x 0.0100 in. Radius x 0.6250 in. (5/8) Length of Cut 5 Flutes ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC21342

0.5000 in. (1/2) Cutter Diameter x 0.0200 in. Radius x 0.6250 in. (5/8) Length of Cut 5 Flutes ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC21343

0.6250 in. (5/8) Cutter Diameter x 0.0200 in. Radius x 0.7500 in. (3/4) Length of Cut 5 Flutes ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC21344

0.7500 in. (3/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.0000 in. (1) Length of Cut 5 Flutes ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC21345

0.5000 in. (1/2) Cutter Diameter x 0.0100 in. Radius x 1.0000 in. (1) Length of Cut 5 Flutes ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC21346

0.5000 in. (1/2) Cutter Diameter x 0.0200 in. Radius x 1.0000 in. (1) Length of Cut 5 Flutes ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC21347

0.6250 in. (5/8) Cutter Diameter x 0.0200 in. Radius x 1.6250 in. (1-5/8) Length of Cut 5 Flutes ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC21348

0.7500 in. (3/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.6250 in. (1-5/8) Length of Cut 5 Flutes ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC21349

3.00 mm Carbide TiSiN Coated 4 Flute 40 Deg. Helix Angle 0.3 mm Corner Radius Extra Short Length End Mill

Item Code: 6706649

4.00 mm Carbide TiSiN Coated 4 Flute 40 Deg. Helix Angle 0.3 mm Corner Radius Extra Short Length End Mill

Item Code: 6706650

4.00 mm Carbide TiSiN Coated 4 Flute 40 Deg. Helix Angle 0.5 mm Corner Radius Extra Short Length End Mill

Item Code: 6706651