3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.031 radius

Item Code: 3089-4.764

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, Super A Coated, HA Shank, 63mm Overal Length, 35/38° Helix Angle

Item Code: 3498-8.01

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

Item Code: 3079-6.354

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

Item Code: 3079-7.944

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

Item Code: 3079-9.524

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.062 radius

Item Code: 3079-12.706

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.062 radius

Item Code: 3079-15.876

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4 Overall Length, 35/38° Helix Angle, 0.125 radius

Item Code: 3079-19.059

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, Super A Coated, HA Shank, 57mm Overal Length, 35/38° Helix Angle

Item Code: 3498-6.01

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 45° Helix Angle, 0.09 radius

Item Code: 3091-15.877

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.031 radius

Item Code: 3089-6.354

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 35/38° Helix Angle

Item Code: 3872-16.01

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 45° Helix Angle, 0.031 radius

Item Code: 3091-19.054

1/8 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle, 0.031 radius

Item Code: 3087-3.174

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.031 radius

Item Code: 6759-12.704