25mm Diameter Endmill, 25mm shank, 4 flutes, 45mm Length of Cut, 63 Reach (mm), Carbide, Super A Coated, HB Shank, 121mm Overal Length, 35/38° Helix Angle, 4 radius (mm)

Item Code: 3499-25.040

25mm Diameter Endmill, 25mm shank, 4 flutes, 45mm Length of Cut, 63 Reach (mm), Carbide, Super A Coated, HB Shank, 121mm Overal Length, 35/38° Helix Angle, 5 radius (mm)

Item Code: 3499-25.050

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, Super A Coated, HB Shank, 57mm Overal Length, 35/38° Helix Angle, 0.5 radius (mm)

Item Code: 3499-6.005

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, Super A Coated, HB Shank, 57mm Overal Length, 35/38° Helix Angle, 0.8 radius (mm)

Item Code: 3499-6.008

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, Super A Coated, HB Shank, 57mm Overal Length, 35/38° Helix Angle, 1 radius (mm)

Item Code: 3499-6.010

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, Super A Coated, HB Shank, 57mm Overal Length, 35/38° Helix Angle, 1.5 radius (mm)

Item Code: 3499-6.015

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, Super A Coated, HB Shank, 57mm Overal Length, 35/38° Helix Angle, 2 radius (mm)

Item Code: 3499-6.020

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, Super A Coated, HB Shank, 63mm Overal Length, 35/38° Helix Angle, 0.5 radius (mm)

Item Code: 3499-8.005

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, Super A Coated, HB Shank, 63mm Overal Length, 35/38° Helix Angle, 0.8 radius (mm)

Item Code: 3499-8.008

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, Super A Coated, HB Shank, 63mm Overal Length, 35/38° Helix Angle, 1 radius (mm)

Item Code: 3499-8.010

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, Super A Coated, HB Shank, 63mm Overal Length, 35/38° Helix Angle, 1.5 radius (mm)

Item Code: 3499-8.015

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, Super A Coated, HB Shank, 63mm Overal Length, 35/38° Helix Angle, 2 radius (mm)

Item Code: 3499-8.020

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, 30 Reach (mm), Carbide, FIREX Coated, HA Shank, 72mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3561-10.005

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, 30 Reach (mm), Carbide, FIREX Coated, HA Shank, 72mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3561-10.010

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, 30 Reach (mm), Carbide, FIREX Coated, HA Shank, 72mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3561-10.015