3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes WTF Coated Endmill

Item Code: GMHT38RH5030WTF

1/2 Inch Diameter, 5/8 Inch LOC, 2-1/2 Inch OAL Carbide ALtima® Coated TuffCut® XR 5-Flute End Mill with 0.030 Radius

Item Code: 17850004A

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0100 in. Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Tplus Coated Corner Radius Endmill

Item Code: 83248

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.2500 in. (1-1/4) Length of Cut x 3.0000 in. (3) Overall Length Carbide 8 Flute Tplus Coated Corner Radius Endmill

Item Code: 86245

3/16 in. Diameter x 3/8 in. Length of Cut x 2 in. Overall Length x 0.015 in. Radius Carbide 5 Flutes GMX-35 Coated Endmill

Item Code: GM316RS5015

1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius GMS2 Coated Carbide 5 Flutes Endmill

Item Code: GMHT12R5030

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0200 in. Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 81958-HELICAL

1/2 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMX-35 Coated Endmill

Item Code: GM12RXL5030

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.6250 in. (1-5/8) Length of Cut x 4.0000 in. (4) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 83107-HELICAL

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0300 in. Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Tplus Coated Corner Radius Endmill

Item Code: 83483

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.2500 in. (1-1/4) Length of Cut x 3.0000 in. (3) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 59877-HELICAL

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0150 in. (1/64) Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 4 Flute Tplus Coated Corner Radius Endmill

Item Code: 83261-HELICAL

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2 Overall Length, 36/38/37/38° Helix Angle, 0.015 radius

Item Code: 6759-4.762

0.0310 in. (1/32) Cutter Diameter x 0.0050 in. Radius x 0.0470 in. (3/64) Length of Cut x 0.1560 in. (5/32) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 64431-C6

3/8 in. Diameter x 5/8 in. Length of Cut x 2 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes WTF Coated Endmill

Item Code: GMHT38RS5030WTF