5/16 Inch Diameter Endmill, 5/16 Shank, 6 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.062 radius

Item Code: 3091-7.946

3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.015 radius

Item Code: 3091-9.522

3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.062 radius

Item Code: 3091-9.526

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3106-10.005

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3106-10.010

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3106-10.015

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 2 radius (mm)

Item Code: 3106-10.020

12mm Diameter Endmill, 12mm shank, 2 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3106-12.005

12mm Diameter Endmill, 12mm shank, 2 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3106-12.010

12mm Diameter Endmill, 12mm shank, 2 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3106-12.015

12mm Diameter Endmill, 12mm shank, 2 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 2 radius (mm)

Item Code: 3106-12.020

16mm Diameter Endmill, 16mm shank, 2 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3106-16.010

16mm Diameter Endmill, 16mm shank, 2 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3106-16.015

16mm Diameter Endmill, 16mm shank, 2 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 2 radius (mm)

Item Code: 3106-16.020

6mm Diameter Endmill, 6mm shank, 2 flutes, 10mm Length of Cut, Carbide, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3106-6.005