16mm Diameter Endmill, 16mm shank, 6 flutes, 32mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 45° Helix Angle, 1 radius (mm)

Item Code: 3112-16.010

16mm Diameter Endmill, 16mm shank, 6 flutes, 32mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 45° Helix Angle, 1.5 radius (mm)

Item Code: 3112-16.015

16mm Diameter Endmill, 16mm shank, 6 flutes, 32mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 45° Helix Angle, 2 radius (mm)

Item Code: 3112-16.020

20mm Diameter Endmill, 20mm shank, 8 flutes, 38mm Length of Cut, Carbide, HA Shank, 104mm Overal Length, 45° Helix Angle, 2 radius (mm)

Item Code: 3112-20.020

6mm Diameter Endmill, 6mm shank, 6 flutes, 13mm Length of Cut, Carbide, HA Shank, 57mm Overal Length, 45° Helix Angle, 1 radius (mm)

Item Code: 3112-6.010

8mm Diameter Endmill, 8mm shank, 6 flutes, 19mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 45° Helix Angle, 0.5 radius (mm)

Item Code: 3112-8.005

1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 3/4 Length of Cut, Carbide, HA Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.02 radius

Item Code: 3177-12.700

5/8 Inch Diameter Endmill, 5/8 Shank, 3 flutes, 7/8 Length of Cut, Carbide, HA Shank, 5 Overall Length, 45° Helix Angle, 0.025 radius

Item Code: 3177-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 3 flutes, 1 Length of Cut, Carbide, HA Shank, 5 Overall Length, 45° Helix Angle, 0.03 radius

Item Code: 3177-19.050

1/4 Inch Diameter Endmill, 1/4 Shank, 3 flutes, 3/8 Length of Cut, Carbide, HA Shank, 3 Overall Length, 45° Helix Angle, 0.01 radius

Item Code: 3177-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 3 flutes, 7/16 Length of Cut, Carbide, HA Shank, 3 Overall Length, 45° Helix Angle, 0.013 radius

Item Code: 3177-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 3 flutes, 9/16 Length of Cut, Carbide, HA Shank, 3 Overall Length, 45° Helix Angle, 0.015 radius

Item Code: 3177-9.520

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1/2 Length of Cut, 2-3/4 Reach, Carbide, nano-Si Coated, HA Shank, 4-1/2 Overall Length, 30° Helix Angle, 0.02 radius

Item Code: 3192-12.700

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 5/8 Length of Cut, 3 Reach, Carbide, nano-Si Coated, HA Shank, 5 Overall Length, 30° Helix Angle, 0.025 radius

Item Code: 3192-15.870

3/16 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/16 Length of Cut, 3/4 Reach, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.008 radius

Item Code: 3192-4.760