1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/4 Length of Cut, 1-1/2 Reach, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.01 radius

Item Code: 3192-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 5/16 Length of Cut, 1-1/2 Reach, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.013 radius

Item Code: 3192-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 3/8 Length of Cut, 1-1/2 Reach, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.013 radius

Item Code: 3192-9.520

10mm Diameter Endmill, 10mm shank, 4 flutes, 15mm Length of Cut, 15 Reach (mm), Carbide, nano-Si Coated, HA Shank, 100mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3362-10.000

10mm Diameter Endmill, 10mm shank, 3 flutes, 19mm Length of Cut, 30 Reach (mm), with Coolant, HA Shank, 72mm Overal Length, 45° Helix Angle, 1.5 radius (mm)

Item Code: 3367-10.000

12mm Diameter Endmill, 12mm shank, 3 flutes, 22mm Length of Cut, 36 Reach (mm), with Coolant, HA Shank, 83mm Overal Length, 45° Helix Angle, 1.5 radius (mm)

Item Code: 3367-12.000

16mm Diameter Endmill, 16mm shank, 3 flutes, 26mm Length of Cut, 42 Reach (mm), with Coolant, HA Shank, 92mm Overal Length, 45° Helix Angle, 2 radius (mm)

Item Code: 3367-16.000

6mm Diameter Endmill, 6mm shank, 3 flutes, 10mm Length of Cut, 20 Reach (mm), with Coolant, HA Shank, 57mm Overal Length, 45° Helix Angle, 1 radius (mm)

Item Code: 3367-6.000

8mm Diameter Endmill, 8mm shank, 3 flutes, 16mm Length of Cut, 26 Reach (mm), with Coolant, HA Shank, 63mm Overal Length, 45° Helix Angle, 1 radius (mm)

Item Code: 3367-8.000

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, Super A Coated, HA Shank, 72mm Overal Length, 35/38° Helix Angle, 0.5 radius (mm)

Item Code: 3498-10.005

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, Super A Coated, HA Shank, 72mm Overal Length, 35/38° Helix Angle, 0.8 radius (mm)

Item Code: 3498-10.008

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, Super A Coated, HA Shank, 72mm Overal Length, 35/38° Helix Angle, 1 radius (mm)

Item Code: 3498-10.010

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, Super A Coated, HA Shank, 72mm Overal Length, 35/38° Helix Angle, 1.5 radius (mm)

Item Code: 3498-10.015

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, Super A Coated, HA Shank, 72mm Overal Length, 35/38° Helix Angle, 2 radius (mm)

Item Code: 3498-10.020

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, Super A Coated, HA Shank, 83mm Overal Length, 35/38° Helix Angle, 0.5 radius (mm)

Item Code: 3498-12.005