3/8 in. Diameter x 5/8 in. Length of Cut x 2 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes WTF Coated Endmill

Item Code: GMRF38RS4015WTF

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 81857

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length x 0.06 in. Radius Carbide 5 Flutes WTF Coated Endmill

Item Code: GMHT14R5060WTF

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.031 radius

Item Code: 6759-6.354

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0300 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 6 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 84396

1/2 (.5000) 5-Flutes FC20 Coated Solid Dura-Carb Fantom 2.0 HP End Mill- .030CR

Item Code: 37650-FULLERTON

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 7 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 27137

3/16 Inch Diameter Solid Carbide AlTiN Coated, 4 Flute, 5/8 Inch LoC, 2 Inch OAL .020” Corner Radius Endmill

Item Code: 14060-COATED

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 2.0000 in. (2) Length of Cut x 4.0000 in. (4) Overall Length Carbide 5 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 34307-HELICAL

0.0930 in. (3/32) Cutter Diameter x 0.0050 in. Radius x 0.2790 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 936493-C6

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes WTF Coated Endmill

Item Code: GMHT14R5030WTF

3/8 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes WTF Coated Endmill

Item Code: GMHTCB38RL5030WTF

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0200 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute TPLUS Coated Corner Radius Endmill

Item Code: 87686

3/8 x 3/8 x 1x 2-1/2 Inch ALtima® Blaze Coated Carbide 5-Flute TuffCut® XT End Mill with .030 Radius

Item Code: 27837514B

5/16 in. Diameter x 7/8 in. Length of Cut x 2-1/2 in. Overall Length x 0.03 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill

Item Code: GM516R4030