1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.062 radius

Item Code: 6759-6.356

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.015 radius

Item Code: 6759-7.942

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.031 radius

Item Code: 6759-7.944

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.062 radius

Item Code: 6759-7.946

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.015 radius

Item Code: 6759-9.522

0.1250 in. (1/8) Cutter Diameter x 0.0350 in. Radius x 0.5000 in. (1/2) Length of Cut 4 Flutes AlTiN Coated Carbide Corner Radius End Mill

Item Code: 32435-C3

0.1250 in. (1/8) Cutter Diameter x 0.0350 in. Radius x 0.5000 in. (1/2) Length of Cut 4 Flutes Carbide Corner Radius End Mill

Item Code: 32435-HARVEY

0.0130 in. Cutter Diameter x 0.0190 in. Length of Cut x 0.0650 in. Reach 3 Flutes Amorphous Diamond Coated Carbide Square End Mill

Item Code: 33213-C4

0.1875 in. (3/16) Cutter Diameter x 0.0350 in. Radius x 0.6250 in. (5/8) Length of Cut 4 Flutes AlTiN Coated Carbide Corner Radius End Mill

Item Code: 34835-C3

0.1875 in. (3/16) Cutter Diameter x 0.0350 in. Radius x 0.6250 in. (5/8) Length of Cut 4 Flutes Carbide Corner Radius End Mill

Item Code: 34835-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.0350 in. Radius x 0.7500 in. (3/4) Length of Cut 4 Flutes AlTiN Coated Carbide Corner Radius End Mill

Item Code: 36235-C3

0.2500 in. (1/4) Cutter Diameter x 0.0350 in. Radius x 0.7500 in. (3/4) Length of Cut 4 Flutes Carbide Corner Radius End Mill

Item Code: 36235-HARVEY

0.1250 in. (1/8) Cutter Diameter x 0.0300 in. Radius x 0.1870 in. (3/16) Length of Cut x 1.0000 in. (1) Reach 3 Flutes Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 42408-C4

0.0780 in. (5/64) Cutter Diameter x 0.0100 in. Radius x 0.2340 in. (15/64) Length of Cut 2 Flutes Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 45278-C4

0.0620 in. (1/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1860 in. Length of Cut 2 Flutes Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 45562-C4