0.0930 in. (3/32) Cutter Diameter x 0.0250 in. Radius x 0.5000 in. (1/2) Length of Cut 4 Flutes Carbide Corner Radius End Mill

Item Code: 719393

0.0930 in. (3/32) Cutter Diameter x 0.0250 in. Radius x 0.5000 in. (1/2) Length of Cut 4 Flutes AlTiN Coated Carbide Corner Radius End Mill

Item Code: 719393-C3

0.2500 in. (1/4) Cutter Diameter x 0.0100 in. Radius x 0.3750 in. (3/8) Length of Cut 5 Flutes Carbide Corner Radius End Mill

Item Code: 719410

0.2500 in. (1/4) Cutter Diameter x 0.0100 in. Radius x 0.3750 in. (3/8) Length of Cut 5 Flutes AlTiN Coated Carbide Corner Radius End Mill

Item Code: 719410-C3

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.2850 in. Length of Cut 5 Flutes Carbide Corner Radius End Mill

Item Code: 719510

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.2850 in. Length of Cut 5 Flutes AlTiN Coated Carbide Corner Radius End Mill

Item Code: 719510-C3

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.1870 in. (3/16) Length of Cut 5 Flutes Carbide Corner Radius End Mill

Item Code: 719610

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.1870 in. (3/16) Length of Cut 5 Flutes AlTiN Coated Carbide Corner Radius End Mill

Item Code: 719610-C3

0.2500 in. (1/4) Cutter Diameter x 0.0100 in. Radius x 0.7500 in. (3/4) Length of Cut 5 Flutes Carbide Corner Radius End Mill

Item Code: 719710

0.2500 in. (1/4) Cutter Diameter x 0.0100 in. Radius x 0.7500 in. (3/4) Length of Cut 5 Flutes AlTiN Coated Carbide Corner Radius End Mill

Item Code: 719710-C3

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.5700 in. Length of Cut 5 Flutes Carbide Corner Radius End Mill

Item Code: 719810

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.5700 in. Length of Cut 5 Flutes AlTiN Coated Carbide Corner Radius End Mill

Item Code: 719810-C3

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.3750 in. (3/8) Length of Cut 5 Flutes Carbide Corner Radius End Mill

Item Code: 719910

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.3750 in. (3/8) Length of Cut 5 Flutes AlTiN Coated Carbide Corner Radius End Mill

Item Code: 719910-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0050 in. Radius x 0.0300 in. Length of Cut 5 Flutes Carbide Corner Radius End Mill

Item Code: 720020