0.03-0.5mm, 150mm Length, Thickness Gage Set, 13 Leaves (0.03-0.1mm by 0.01mm, 0.2-0.5mm by 0.1mm, 0.15mm)

Item Code: 184-302S

0.05-1mm, 150mm Length, Thickness Gage Set, 28 Leaves (0.05-0.15mm by 0.01mm, 0.2-1mm by 0.05mm)

Item Code: 184-303S

0.05-1mm, 100mm Length, Thickness Gage Set, 28 Leaves (0.05-0.15mm by 0.01mm, 0.2-1mm by 0.05mm)

Item Code: 184-313S

17/64 Inch - 1/2 Inch, Concave/Convex Radius Gage Set, 16 Pairs of Leaves (17/64 Inch to 1/2 Inch by 64ths), Locking Clamp

Item Code: 186-102

1/32 Inch - 17/64 Inch, Concave/Convex Radius Gage Set, 16 Pairs of Leaves (1/32 Inch to 17/64 Inch by 64ths), Locking Clamp

Item Code: 186-103

1mm-7mm, Concave/Convex Radius Gage Set, 34 Pairs of Leaves (1mm to 3mm by 0.25mm, 3.5mm to 7mm by 0.5mm), Locking Clamp

Item Code: 186-105

7.5mm-15mm, Concave/Convex Radius Gage Set, 32 Pairs of Leaves ( 7.5mm to 15mm by 0.5mm), Locking Clamp

Item Code: 186-106

15.5mm-25mm, Concave/Convex Radius Gage Set, 15 Pairs of Leaves (15.5mm to 20mm by 0.5mm, 21 to 25mm by 1mm), Locking Clamp

Item Code: 186-107

9/16 Inch - 1 Inch, Concave/Convex Radius Gage Set, 8 Leaves (9/16 Inch to 1 Inch by 16ths), With Holder

Item Code: 186-905

.0005 In, .05 In/(.02 In per rev) Dial Indicator, 0-5-0, Flat Back, Series 0, 3/8 In stem diameter, Jeweled

Item Code: 1923TB-10

25-50mm, 0.01mm Digit Counter Outside Micrometer, Carbide Tip, Ratchet Stop, With Standard

Item Code: 193-102

0-1 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-151

1 Inch - 2 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-152

3 Inch - 4 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-154

4 Inch - 5 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-155

8 Inch - 9 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-159

9 Inch - 10 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-160

10 Inch - 11 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-161

11 Inch - 12 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-162

0-1 Inch, .001 Inch, Digit Counter Disk Micrometer, Ratchet Stop

Item Code: 223-125

7 to 8 Inch Range, 0.0001 Inch Resolution, Standard Throat, IP65 Electronic Outside Micrometer

Item Code: 293-353-30

0-1 Inch, 0.0001 Inch, Digit Counter Spherical Face Micrometer, Carbide Steel Tip, Spherical Anvil Spherical Spindle, 0.40 In Max Inside Diameter, Ratchet Stop

Item Code: 295-253

1 Inch - 2 Inch, 0.00005 Inch, IP65 Digimatic Disk Micrometer, .787 Inch/20mm Diameter .028 Inch/0.7mm Edge Thickness Disk, With SPC Data Output, Ratchet Stop, With Standard

Item Code: 323-351-30

2 Inch - 3 Inch, 0.00005 Inch, IP65 Digimatic Disk Micrometer, .787 Inch/20mm Diameter .028 Inch/0.7mm Edge Thickness Disk, With SPC Data Output, Ratchet Stop, With Standard

Item Code: 323-352-30

2 Inch - 3 Inch, 0.00005 Inch, IP65 Digimatic Screw Thread Micrometer, With SPC Data Output, Ratchet Stop, With Standard, Optional Anvils Available

Item Code: 326-353-30