5 in. OAL Coolant Thru ANSI Standard Tap Extension - #0 - #6 Tap Size (M1.6 - M3.5)

Item Code: 96150-WHITNEY

#40 (.0980) Whitney Tool Drill Extension System Collet - Series 1

Item Code: 96010-WHITNEY

9 in. OAL DIN Standard (Metric) Tap Extension - DIN 371 (M12) DIN 374/376 (M16)

Item Code: 96222-WHITNEY

9 in. OAL Coolant Thru DIN Standard (Metric) Tap Extension - DIN 371 (M12) DIN 374/376 (M16)

Item Code: 96261-WHITNEY

5 in. OAL Coolant Thru DIN Standard (Metric) Tap Extension - DIN 371 (M12) DIN 374/376 (M16)

Item Code: 96250-WHITNEY

Jacketed Fiberglass Engineering Hammer – 4 lbs. - STANLEY®

Item Code: 56-204

1.5 Lb. Brass Hammer - Proto®

Item Code: J1430G

2.6 Lb. Brass Hammer - Proto®

Item Code: J1432G

3 Lb. Hand Drilling Hammer - Proto®

Item Code: J1443G

Soft-Face Sledge Hammer – 5 lbs. - STANLEY® Compo-Cast®

Item Code: 57-550

Soft-Face Sledge Hammer – 10.5 lbs. - STANLEY® Compo-Cast®

Item Code: 57-552

Blacksmith Hammer – 2 lbs. - STANLEY® FATMAX® Anti-Vibe®

Item Code: 56-003-PROTO

Jacketed Fiberglass Blacksmith Hammer – 2.5 lbs. - STANLEY®

Item Code: 56-218-PROTO

Jacketed Fiberglass Blacksmith Hammer – 4 lbs. - STANLEY®

Item Code: 56-220

Hickory Handle Sledge Hammer – 8 lbs. - STANLEY®

Item Code: 56-808

Hickory Handle Sledge Hammer – 10 lbs. - STANLEY®

Item Code: 56-810

Hickory Handle Sledge Hammer – 12 lbs. - STANLEY®

Item Code: 56-812

Hickory Handle Sledge Hammer – 16 lbs. - STANLEY®

Item Code: 56-816

Multi-Angle Base Vise - STANLEY® MaxSteel®

Item Code: 83-069M

Blacksmith Sledge Hammer - 4 lbs. - STANLEY® FATMAX® Anti-Vibe®

Item Code: FMHT56008

Sledge Hammer - 8 lbs. - STANLEY® FATMAX® Anti-Vibe®

Item Code: FMHT56011

2.5 Lb. Double-Faced Sledge Hammer - Proto®

Item Code: J1433G

3 Lb. Double-Faced Sledge Hammer - Proto®

Item Code: J1434G

4 Lb. Double-Faced Sledge Hammer - Proto®

Item Code: J1435G

2 Inch x 4 Inch Clamp - STANLEY®

Item Code: STHT83166

1-1/2 in. x 6 in. Taper Shank CAT50 End Mill Adapter

Item Code: CV50EM125600

1/2 Inch Hole Diameter, 55mm Projection, KM63XMZ Modular Connection End Mill Holder

Item Code: KM63XMZEM050216Y

3/4 Inch Hole Diameter, 65mm Projection, KM63XMZ Modular Connection End Mill Holder

Item Code: KM63XMZEM075256Y

1 Inch Hole Diameter, 80mm Projection, KM63XMZ Modular Connection End Mill Holder

Item Code: KM63XMZEM100315Y

0.02 to 13/32 Inch Collet Capacity, KM63XMZ Modular Connection, Series ER16 Collet Chuck

Item Code: KM63XMZER1660Y

1-1/2 Inch Bore Diameter, 3.15 Inch Body Diameter x 4.134 Inch Body Length, KM63 Boring Bar Holder and Adapter

Item Code: KM63XMZBA150413Y

3/4 in. x 4.00 in. CAT40 Taper Shank Hydraulic Chuck

Item Code: CV40BHC075400

1.00 in. ER40 Single-Angle Standard Collet

Item Code: 40ER1000

KM63XMZ Connection, Through Coolant, Left Hand Cut, Adapter/Mount Lathe Modular Clamping Unit

Item Code: KM63XMZSTALF16Y

0.381 Inch, Series J, 3/8 Inch Tap, Double Angle Hand Tap Collet

Item Code: JTC037

CAT50 1.250 Inch x 3.54 Inch Gage Length Form B/AD HPMC Milling Chuck

Item Code: CV50HPMC125354

50 mm ER32 CVK40 Single-Angle Collet Chuck

Item Code: CVKV40ER32275

1/2 in. x 3.00 in. CKV40 Taper Shank End Mill Adapter

Item Code: CVKV40BEM050300

12 mm. x 3 mm Slotted Hydraulic Chuck Sleeve

Item Code: 12MHC040M

3/4 Inch Hole Diameter, 1-8 Drawbar Thread, 7-3/4 Inch, CAT50 Taper Shank End Mill Holder

Item Code: CV50EM075775

CAT50 18mm I.D. x 200mm Gage Length Slim Line Form B/AD Hydraulic Chuck

Item Code: CV50BHCSL18M787

1 Inch Hole Diameter, 1-8 Drawbar Thread, CAT50 Taper Shank End Mill Holder

Item Code: CV50EM100400

3/4 Inch Hole Diameter, 1-8 Drawbar Thread, CAT50 Taper Shank End Mill Holder

Item Code: CV50EM075375

3/4 Inch Hole Diameter, 1-8 Drawbar Thread, 5-3/4 Inch Projection, CAT50 Taper Shank End Mill Holder

Item Code: CV50EM075575

CAT50 1-1/2 Inch Arbor x 6.00 Inch Gage Length SMC IN-CV Form B/AD Shell Mill Adapter

Item Code: CV50BSMC150600

CAT50 Taper Shank, 1-1/4 Inch Hole Diameter, 59.94mm Nose Diameter, 117.48mm Projection, Hydraulic Tool Holder and Chuck

Item Code: CV50BHC125462

3/4 in. x 3.50 in. Taper Shank Shell Mill Adapter

Item Code: CV50BSMC075350

3/4 Inch Hole Diameter, 5/8-11 Drawbar Thread, CAT40 Taper Shank End Mill Holder

Item Code: CV40ZEM075175

1/64 to 1/4 Inch Collet Capacity, 4.38 Inch Overall Length, Straight Shank, Series DA300 Collet Chuck

Item Code: SS050DA304438

SLEEVE 20MMX1/2"X2" REDUCER WIDIA

Item Code: 20HCM0500