0.03 Inch, Dial Test Indicator, Full Set 0-15-0, 0.0005 Inch Graduation, 3/8 Inch Stems, 0.079 Inch/.039 Inch/.118 Inch Contact Points, Clamp and Hold Bar, 19.9mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-402T

0 Inch -1 Inch Outside Diameter, 0.055 Inch - 1.05 Inch Inside Diameter, 0.001 Inch, Mechanical Groove Micrometer, 0.25 Inch Diameter Flange, Non-Rotating Spindle

Item Code: 146-231

0-1 Inch, 0.00005 Inch, IP65 Digimatic Disk Micrometer, .787 Inch/20mm Diameter .028 Inch/0.7mm Edge Thickness Disk, With SPC Data Output, Ratchet Stop

Item Code: 323-350-30

3-4 Inch Measuring Range, 0.0001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

Item Code: 103-218

0-40 Inch(1000mm), 0.0005 Inch(0.01mm), ABSOLUTE Digimatic Caliper, With SPC Data Output, No Thumb Roller

Item Code: 500-507-10

0.03 In, Dial Test Indicator, Basic Set 0-15-0, 0.0005 Inch Graduation, 3/8 Inch Stem, 0.079 Inch Contact Point, 19.9mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-402-10E

6 Inch, 150mm, Pocket Steel Rule, 1/2 Inch Wide , Pocket Clip, (1/64,1mm)

Item Code: 950-300

0-1 Inch, 0.00005 Inch, IP65 Uni-Mike Digimatic Interchangeable Anvil Micrometer, With SPC Data Output, Friction Thimble, Flat and Rod Anvils Included

Item Code: 317-351-30

0-1 Inch Measuring Range, 0.0001 Graduation, Ratchet Thimble, Carbide Face, Ball Anvil Micrometer

Item Code: 115-153

0-6 Inch(150mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, With SPC Data Output, Carbide OD Jaws

Item Code: 500-174-30

6-7 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

Item Code: 103-183

7-8 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

Item Code: 103-184

0-12 Inch, 0.001 Inch Dial Caliper, 0.1 Inch/Revolution, White Face, Carbide OD

Item Code: 505-747

0-24 Inch, 0.001 Inch Graduation, Dial Height Gage, With Dual Digit Counters, With Carbide Tipped Scriber

Item Code: 192-152

0-1 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, 30 Degree, Point Micrometer

Item Code: 112-237

1/32 Inch - 1/4 Inch, Concave/Convex Radius Gage Set, 15 Pairs of Leaves (1/32 Inch to 1/4 Inch by 64ths), Locking Clamp

Item Code: 186-101

0-1 Inch Measuring Range, 0.0001 Graduation, Ratchet Thimble, Carbide Face, Tubing Micrometer

Item Code: 115-313

0 to 1 Inch Range, 0.0005 Inch Resolution, Electronic Drop Indicator

Item Code: 575-123

2 Inch - 3 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-153

0.008 Inch, Dial Test Indicator, Full Set 0-4-0, 0.0001 Graduation, 3/8 Inch Stems, 0.079 Inch/.039 Inch/.118 Inch Contact Points, Clamp and Hold Bar, 15mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-403-10T

0.8mm, Dial Test Indicator,Basic Set 0-40-0, 0.01mm Graduation, 8mm Stem, 2mm Contact Point, 20.9mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-404E

0-4 Inch, .001 Inch Mechanical Outside Micrometer Set, Hammertone Baked Enamel, 4 gages, with 3 standards

Item Code: 103-930

0 Inch - 2 Inch (0-50mm) Micrometer Stand, Fixed Angle With Platform for 3-Wire Measurement

Item Code: 156-106

0.03 Inch Range, 0.0005 Inch Dial Graduation, Horizontal Dial Test Indicator

Item Code: 513-412T

150mm Length Carbide Tipped Height Gage Scriber for 192/570 Series Inch Height Gage Models

Item Code: 905201