3 Inch (75mm) Depth Base Attachment, For 4, 6, 8 Inch/100, 150, 200mm Calipers

Item Code: 050083-10

5 Inch (125mm) Depth Base Attachment, For 12 Inch/300mm Calipers

Item Code: 050085-10

0-12 Inch Measuring Range, Ratchet Thimble, 4 Inch Base, Mechanical Depth Micrometer

Item Code: 129-150

0-8 Inch(200mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, With SPC Data Output

Item Code: 500-172-30

3-4 Inch, 0.0001 Inch Digit Counter Outside Micrometer, Carbide Tip, Ratchet Stop, With Standard

Item Code: 193-214

0 to 1 Inch Range, 0.0001 Inch Resolution, Standard Throat, IP65 Electronic Outside Micrometer

Item Code: 293-340-30

0 to 1 Inch Range, 0.0001 Inch Resolution, Standard Throat, IP65 Electronic Outside Micrometer

Item Code: 293-344-30

0-6 Inch(150mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, No Output, Carbide OD/ID Jaws

Item Code: 500-160-30

0-3 Inch, 0.00005 Inch, IP65 Digimatic Outside Micrometer Set, 3 Micrometers, 2 Standard Bars, With SPC Data Output, Ratchet Stop

Item Code: 293-960-30

0-4 Inch, 0.00005 Inch, IP65 Digimatic Outside Micrometer Set, 4 Micrometers, 3 Standard Bars, With SPC Data Output, Ratchet Stop

Item Code: 293-961-30

3-4 Inch/76.2-101.6mm, 0.00005 In/0.001mm IP65 Digimatic Outside Micrometer, With SPC Data Output, Ratchet Stop, With Standard

Item Code: 293-333-30

.04-1.5 Inch/ 1-38mm Diameter, Height Gage Center Master, With Inch Type Hold Bar

Item Code: 900581

1-2 Inch/25.4-50.8mm, 0.00005 In/0.001mm IP65 Digimatic Outside Micrometer, With SPC Data Output, Friction, With Standard

Item Code: 293-336-30

2 Inch - 2.5 Inch, 0.0002 Inch, Holtest, Type II, Alloyed Steel Contact Points, Ratchet Stop

Item Code: 368-870

1.6 Inch - 2 Inch, 0.0002 Inch, Holtest, Type II, Alloyed Steel Contact Points, Ratchet Stop

Item Code: 368-869

0-1 Inch, 0.00005 Inch, Digimatic Outside Micrometer, Non-Rotating Spindle, With SPC Data Output, Ratchet Stop

Item Code: 406-350-30

0 to 1 Inch Range, 0.0001 Inch Resolution, Standard Throat, IP65 Electronic Outside Micrometer

Item Code: 293-180

2 Inch - 3 Inch/50.8mm-76.2mm, 0.00005 In/0.001mm IP65 QuantuMike Digimatic Outside Micrometer, With SPC Data Output, Ratchet Thimble, With Standard

Item Code: 293-182

3 Inch - 4 Inch/76.2mm-101.6mm, 0.00005 Inch/0.001mm IP65 QuantuMike Digimatic Outside Micrometer, With SPC Data Output, Ratchet Thimble, With Standard

Item Code: 293-183

2-8 Inch, .001 Inch, Mechanical Extention Rod Type Inside Micrometer, Extention Rods (3)

Item Code: 141-208

0-12 Inch, 0.00005 Inch, Digimatic Depth Micrometer, 12 interchangeable rods (1 Inch/25.4mm increments), Rod Clamp, 4 Inch Base, With SPC Data Output, Ratchet Stop

Item Code: 329-351-30

0-1 Inch, 0.00005 Inch, Digimatic Lite Outside Micrometer, No Spindle Clamp, No Output, Ratchet Stop

Item Code: 293-831-30

5 Inch, Micrometer Standard Bar, .31 In, Diameter

Item Code: 167-145

47mm Length Carbide-Tipped Height Gage Scriber for 570/506/509 Series Inch Height Gage Models

Item Code: 900173

0.5 Inch - 0.65 Inch, 0.0001 Inch, Holtest, Titanium Nitride Coated Contact Points, Ratchet Stop

Item Code: 368-264