9/16 Inch - 1 Inch, Concave/Convex Radius Gage Set, 8 Leaves (9/16 Inch to 1 Inch by 16ths), With Holder

Item Code: 186-905

.0005 In, .05 In/(.02 In per rev) Dial Indicator, 0-5-0, Flat Back, Series 0, 3/8 In stem diameter, Jeweled

Item Code: 1923TB-10

25-50mm, 0.01mm Digit Counter Outside Micrometer, Carbide Tip, Ratchet Stop, With Standard

Item Code: 193-102

0-1 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-151

1 Inch - 2 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-152

3 Inch - 4 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-154

4 Inch - 5 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-155

8 Inch - 9 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-159

9 Inch - 10 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-160

10 Inch - 11 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-161

11 Inch - 12 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-162

0-1 Inch, .001 Inch, Digit Counter Disk Micrometer, Ratchet Stop

Item Code: 223-125

7 to 8 Inch Range, 0.0001 Inch Resolution, Standard Throat, IP65 Electronic Outside Micrometer

Item Code: 293-353-30

0-1 Inch, 0.0001 Inch, Digit Counter Spherical Face Micrometer, Carbide Steel Tip, Spherical Anvil Spherical Spindle, 0.40 In Max Inside Diameter, Ratchet Stop

Item Code: 295-253

1 Inch - 2 Inch, 0.00005 Inch, IP65 Digimatic Disk Micrometer, .787 Inch/20mm Diameter .028 Inch/0.7mm Edge Thickness Disk, With SPC Data Output, Ratchet Stop, With Standard

Item Code: 323-351-30

2 Inch - 3 Inch, 0.00005 Inch, IP65 Digimatic Disk Micrometer, .787 Inch/20mm Diameter .028 Inch/0.7mm Edge Thickness Disk, With SPC Data Output, Ratchet Stop, With Standard

Item Code: 323-352-30

2 Inch - 3 Inch, 0.00005 Inch, IP65 Digimatic Screw Thread Micrometer, With SPC Data Output, Ratchet Stop, With Standard, Optional Anvils Available

Item Code: 326-353-30

0-6 Inch, 0.00005 Inch, IP65 DigimaticInterchangeable Anvil Micrometer, With 6 Anvils and 5 Standards, With SPC Data Output, Ratchet Stop

Item Code: 340-351-30

6 Inch - 12 Inch, 0.00005 Inch, P65 DigimaticInterchangeable Anvil Micrometer, With 6 Anvils and 6 Standards, With SPC Data Output, Ratchet Stop

Item Code: 340-352-30

1 Inch - 2 Inch(25-50mm), 0.00005 Inch(0.001mm) Digimatic Caliper Jaw Type Micrometer, Carbide Steel Tip, Locking Clamp, With SPC Data Output, Ratchet Stop

Item Code: 345-351-30

0-1 Inch/0-25.4mm, .00005 Inch/0.001mm, Digimatic Micrometer Head, .375 Inch Diameter Stem with Clamp Nut, Flat Carbide Tipped Spindle Face, Ratchet Stop

Item Code: 350-352-30

0.8 Inch - 1 Inch, 0.0002 Inch, Holtest, Titanium Nitride Coated Contact Points, Ratchet Stop

Item Code: 368-266

1 Inch - 1.2 Inch, 0.0002 Inch, Holtest, Titanium Nitride Coated Contact Points, Ratchet Stop

Item Code: 368-267

1.2 Inch - 1.6 Inch, 0.0002 Inch, Holtest, Titanium Nitride Coated Contact Points, Ratchet Stop

Item Code: 368-268

1.6 Inch - 2 Inch, 0.0002 Inch, Holtest, Titanium Nitride Coated Contact Points, Ratchet Stop

Item Code: 368-269