5 Inch - 6 Inch, 0.0002 Inch, Holtest, Type II, Alloyed Steel Contact Points, Ratchet Stop

Item Code: 368-875

0-1 Inch, 0.00005 Inch, Digimatic Lite Outside Micrometer, No Spindle Clamp, No Output, Friction Thimble

Item Code: 293-832-30

0-6 Inch, .0001 Inch Mechanical Outside Micrometer Set, Hammertone Baked Enamel, 6 gages, with 5 standards

Item Code: 103-907-40

0-24 Inch(600mm), 0.0005 Inch(0.01mm) ABSOLUTE Digimatic Caliper, With SPC Data Output, No Thumb Roller

Item Code: 500-506-10

1 Inch, Screw Thread Micrometer Standard Bar, 60 Degrees

Item Code: 167-294

0-8 Inch(200mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, No Output, Carbide OD/ID Jaws

Item Code: 500-164-30

1.2-1.6 Inch Bore Gage Head Assmbly

Item Code: 04AZA739

0-1 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, High Speed Steel Face, 15 Degree, Point Micrometer

Item Code: 112-177

0-1 Inch, 0.0001 Inch Graduation, 6.3 Inch Mechanical Deep Throat Micrometer, Ratchet Stop

Item Code: 118-129

0-4 Inch Measuring Range, Ratchet Thimble, 4 Inch Base, Mechanical Depth Micrometer

Item Code: 129-131

4 Inch (100mm) Depth Base Attachment, For 4, 6, 8 Inch/100, 150, 200mm Calipers

Item Code: 050084-10

0.65-0.8 Inch Bore Gage Head Assmbly

Item Code: 04AZA722

0-18 Inch/450mm, .0005 Inch/.0002 Inch/0.01mm/0.005mm, Standard Type Digimatic Height Gage, With SPC Output

Item Code: 192-631-10

1-2 Inch, .0001 Inch Mechanical Outside Micrometer, Smooth Action, Ratchet Thimble, With Standard

Item Code: 102-718

0.8-0.1 Inch Bore Gage Head Assmbly

Item Code: 04AZA730

1-1.2 Inch Bore Gage Head Assmbly

Item Code: 04AZA731

Pro 360 Digital Protractor, .1 Degree Resolution

Item Code: 950-317

0-6 Inch, 0.00005 Inch, Digimatic Depth Micrometer, 6 interchangeable rods (1 Inch/25.4mm increments), Rod Clamp, 4 Inch Base, With SPC Data Output, Ratchet Stop

Item Code: 329-350-30

0-24 In/0-600mm, .0005 Inch(0.01mm), ABSOLUTE Digimatic Nib Jaw Caliper, With SPC Data Output, No Depth Bar

Item Code: 550-225-10

0.4mm-7mm, 60 Degrees, Screw Pitch 21 Leave Gage Set

Item Code: 188-122

0-12 Inch/300mm, .0005 Inch/.0002 Inch/0.01mm/0.005mm, Standard Type Digimatic Height Gage, With SPC Output

Item Code: 192-630-10

0-8 Inch(200mm), 0.0005 Inch(0.01mm), IP67 ABSOLUTE Digimatic Caliper, With SPC Data Output, Carbide OD/ID Jaws

Item Code: 500-738-10

0.425 Inch - 0.5 Inch, 0.0001 Inch, Holtest, Titanium Nitride Coated Contact Points, Ratchet Stop

Item Code: 368-263

1.6-2 InchBore Gage Head Assmbly

Item Code: 04AZA740

0.14mm, Dial Test Indicator, Basic Set, 0-7-0, 0.001mm Graduation, 8mm Stem, 2mm Contact Point, 12.8mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-401E

5-6 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

Item Code: 103-182

0-1 Inch Measuring Range, Ratchet Thimble, High Speed Steel Face, Interchangeable Anvil Thread Micrometer

Item Code: 126-901

1-2 Inch Measuring Range, 0.0001 Graduation, Friction Thimble, Carbide Face, Outside Micrometer

Item Code: 103-136

0-18 Inch/450mm, .0005 Inch/.0002 Inch/0.01mm/0.005mm, Multi-Function Type Digimatic Height Gage, With SPC Output

Item Code: 192-671-10

0.7 Inch - 1.4 Inch Dial Bore Gage w/2923SB-10 Dial Indicator, 0.0001 Inch Graduation

Item Code: 511-751-20

6-7 Inch, .0001 Inch Mechanical Outside Micrometer, Hammertone Baked Enamel, Ratchet Stop, With Standard

Item Code: 103-221

13-14 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

Item Code: 103-190

0-1 Inch Measuring Range, 0.0001 Graduation, Ratchet Thimble, Carbide Face, Ball Anvil & Spindle Micrometer

Item Code: 115-253

6 Inch, 3R Graduation, Steel Rule, 1/2 Inch Wide, Flexible, Satin Chrome Finish Tempered Stainless Steel, (1/32, 1/60, 1/10, 1/50)

Item Code: 182-204

0mm-25mm Measuring Range, 0.01mm Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

Item Code: 103-137

2-3 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, High Speed Steel Face, Interchangeable Anvil Thread Micrometer

Item Code: 126-139

0-6 Inch(150mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, No Output, Carbide OD Jaws

Item Code: 500-159-30

14-15 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

Item Code: 103-191

15-16 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

Item Code: 103-192

0 Inch - 1/2 Inch, 0.001 In, Mechanical Micrometer Head, 3/8 Inch Diameter Stem with Clamp Nut, Flat Spindle Face, Spindle Lock, Zero-Adjust Thimble

Item Code: 148-502

Pro 3600 Digital Protractor .1/.01 Degree Resolution, With RS-232C Output

Item Code: 950-318

0.5 Inch - 0.65 Inch, 0.0002 Inch, Holtest, Type II, Alloyed Steel Contact Points, Ratchet Stop

Item Code: 368-864

0.8 Inch - 1 Inch, 0.0002 Inch, Holtest, Type II, Alloyed Steel Contact Points, Ratchet Stop

Item Code: 368-866

0 to 6 Inch Range, Stainless Steel, White Dial Depth Gage

Item Code: 527-311-50

0 to 12 Inch Range, Stainless Steel, White Dial Depth Gage

Item Code: 527-313-50

0 to 24 Inch Range, 0.0005 Inch Resolution, IP66 Electronic Caliper

Item Code: 552-313-10

0-8 Inch, 0.001 Inch Dial Caliper, 0.1 Inch/Revolution, White Face, Carbide OD/ID Jaws

Item Code: 505-739

0-0.8 Inch(0-20mm), .00005 Inch(0.001mm) Digimatic Crimp Height Micrometer, 60 Degree Point, With SPC Data Output, Ratchet Stop

Item Code: 342-371-30

0-8 Inch(200mm), 0.0005 Inch(0.01mm), IP67 ABSOLUTE Digimatic Caliper, No Output, Carbide OD/ID Jaws

Item Code: 500-734-20

Magnetic Base, For Indicators, 3/8 Inand 6/8mm Stem Hole Diameters, Flexible Arm, Fine Feed Adjustment

Item Code: 7012-10