6 Inch - 7 Inch, 0.0001 Inch, Digimatic Holtest, With SPC Output, Ratchet Stop

Item Code: 468-276

7 Inch - 8 Inch, 0.0001 Inch, Digimatic Holtest, With SPC Output, Ratchet Stop

Item Code: 468-277

8 Inch - 9 Inch, 0.0001 Inch, Digimatic Holtest, With SPC Output, Ratchet Stop

Item Code: 468-278

9 Inch - 10 Inch, 0.0001 Inch, Digimatic Holtest, With SPC Output, Ratchet Stop

Item Code: 468-279

10 Inch - 11 Inch, 0.0001 Inch, Digimatic Holtest, With SPC Output, Ratchet Stop

Item Code: 468-280

11 Inch - 12 Inch, 0.0001 Inch, Digimatic Holtest, With SPC Output, Ratchet Stop

Item Code: 468-281

0-150mm, 0.01mm, ABSOLUTE AOS Digimatic Caliper, With SPC Data Output

Item Code: 500-151-30

0-6 Inch(150mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, With SPC Data Output, .075 In Round Depth Bar

Item Code: 500-178-30

0-6 Inch(150mm), 0.0005 Inch(0.01mm), IP67 ABSOLUTE Digimatic Caliper, With SPC Data Output

Item Code: 500-762-20

0-200mm, 0.02mm Dial Caliper, 2mm/Revolution

Item Code: 505-731

0-300mm, 0.02mm Dial Caliper, 2mm/Revolution

Item Code: 505-745

0-1 Inch, 0.00005 Inch, Dial Indicating Micrometer, Carbide Steel Tip, With Retactable Anvil Button

Item Code: 510-131

1.4 Inch - 2.5 Inch Dial Bore Gage, Indicator Not Included

Item Code: 511-732

0.8mm, Dial Test Indicator,Basic Set 0-40-0, 0.01mm Graduation, 8/4mm Stems, 2/1/3mm Contact Points, Clamp and Hold Bar, 20.9mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-404T

0.2mm, Dial Test Indicator,Gage Only 0-100-0, 0.002mm Graduation, 2mm Contact Point, 20.9mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-405

0.2mm, Dial Test Indicator,Basic Set 0-100-0, 0.002mm Graduation, 8/4mm Stems, 2/1/3mm Contact Points, Clamp and Hold Bar, 20.9mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-405T

0.03 Inch Range, 0.0005 Inch Dial Graduation, Horizontal Dial Test Indicator

Item Code: 513-406T

1/2 mm Range, 0.01 mm Dial Graduation, Horizontal Dial Test Indicator

Item Code: 513-414T

0.06 Inch Range, 0.0005 Inch Dial Graduation, Horizontal Dial Test Indicator

Item Code: 513-442-06

9 Piece, 0 to 0.06 Inch Measuring Range, 1.5748 Inch Dial Diameter, 0 to 15 to 0 Dial Reading, Black Test Indicator Kit

Item Code: 513-442T-06

9 Piece, 0 to 0.016 Inch Measuring Range, 1.5748 Inch Dial Diameter, 0 to 4 to 0 Dial Reading, Black Test Indicator Kit

Item Code: 513-443-16T

0.06 Inch Range, 0.0005 Inch Dial Graduation, Horizontal Dial Test Indicator

Item Code: 513-446

0.06 Inch Range, 0.0005 Inch Dial Graduation, Horizontal Dial Test Indicator

Item Code: 513-446-06

9 Piece, 0 to 0.06 Inch Measuring Range, 1.5748 Inch Dial Diameter, 0 to 15 to 0 Dial Reading, White Test Indicator Kit

Item Code: 513-446T

0.03 Inch Range, 0.0005 Inch Dial Graduation, Vertical Dial Test Indicator

Item Code: 513-452

0.008 Inch Range, 0.0001 Inch Dial Graduation, Vertical Dial Test Indicator

Item Code: 513-453

0 to 300mm Measurement Range, 410mm Rule Length, 4 Inch Base Length, Vernier Depth Gage

Item Code: 527-103

0-150mm/0-6 Inch, 0.05mm and 1/128 Inch, Vernier Caliper, Dual Scale

Item Code: 530-104

0 to 6 Inch, Includes Inside Diameter Jaws, Stainless Steel, Vernier Caliper

Item Code: 530-105

0 to 8 Inch, Includes Inside Diameter Jaws, Stainless Steel, Vernier Caliper

Item Code: 530-116

0 to 8 Inch, Includes Inside Diameter Jaws, Stainless Steel, Satin Chrome Finish Vernier Caliper

Item Code: 530-118

0 to 6 Inch, Includes Inside Diameter Jaws, Stainless Steel, Satin Chrome Finish Vernier Caliper

Item Code: 530-312

0 to 6 Inch, Includes Inside Diameter Jaws, Stainless Steel, Vernier Caliper

Item Code: 531-128

0 to 8 Inch, Includes Inside Diameter Jaws, Stainless Steel, Vernier Caliper

Item Code: 531-129

0 to 18 Inch, Stainless Steel, Electronic Depth Gage

Item Code: 571-214-10

Gage Stand, For Indicators and Linear Gages, 3/8 Inand 8mm Stem Hole Diameters, Serrated Anvil

Item Code: 7001-10

7 Inch Extension Base, Accessory for Depth Gage, For Depth Gages with Ranges below 0-24 Inch/0-600mm only

Item Code: 900367

10 Inch Extension Base, Accessory for Depth Gage, 0-24 Inch/0-600mm only

Item Code: 900368

12 Inch Extension Base, Accessory for Depth Gage, 0-24 Inch/0-600mm only

Item Code: 900369

.217 Inch Minimum Diameter, 2.95 Inch Maximum Reach, Height Gage Depth Gage Attachment, With Inch Type Hold Bar

Item Code: 900878

#0-36 American Standard Wire Gage

Item Code: 950-202

4 Inch Hermaphrodite Caliper

Item Code: 950-241

0-6 Inch/150mm, .0005 Inch/0.01mm, IP67 ABSOLUTE Digimatic Caliper, No Output, Carbide OD/ID Jaws

Item Code: 500-733-20

1.5-12 Inch, .001 Inch, Mechanical Extention Rod Type Inside Micrometer, Extention Rods (.5 Inch, 1 Inch, 2 Inch, 2.5 Inch, 3 Inch, 3.5 Inch, 4 Inch, 6 In)

Item Code: 139-201

.5-.65 Inch, Holtest(368-264), Digimatic Holtest(468-264), Borematic(568-464) Replacement Head Assembly, Titanium Nitride Coated Contact Points

Item Code: 04AZA721

3-4 Inch, .0001 Inch Mechanical Outside Micrometer, Satin Chrome, Ratchet Stop, With Standard

Item Code: 101-120

0-1 Inch, .0001 Inch Mechanical Outside Micrometer, Smooth Action, Ratchet Thimble

Item Code: 102-717

0-1 Inch, .0001 Inch Mechanical Outside Micrometer, Hammertone Baked Enamel, Ratchet Stop

Item Code: 103-131

1-2 Inch, .0001 Inch Mechanical Outside Micrometer, Hammertone Baked Enamel, Ratchet Stop, With Standard

Item Code: 103-132

0-1 In.001 Inch, Mechanical Depth Micrometer, Rod Clamp, 2.5 Inch Base, Ratchet Stop

Item Code: 128-105