2-12 Inch, .001 Inch, Mechanical Extention Rod Type Inside Micrometer, Extention Rods (5)

Item Code: 141-233

5/16 to 1/2 Inch, 4.3307 Inch Overall Length, Telescoping Gage

Item Code: 155-121

4-42 TPI, 55 Degrees, Screw Pitch 30 Leave Gage Set

Item Code: 188-101

0 to 1 Inch Range, 0.0001 Inch Resolution, Standard Throat, None Electronic Outside Micrometer

Item Code: 293-348-30

110 x 110mm Comparator Stand, For Indicators and Linear Gages, Serrated Anvils, 3/8 Inch and 8mm Diameter Stem Holes, 275mm Travel, With 1mm Fine Feed Adjustment

Item Code: 215-405-10

0-1 Inch/0-25.4mm, .00005 Inch/0.001mm, Digimatic Micrometer Head, .375 Inch Diameter Plain Stem, Flat Carbide Tipped Spindle Face, Ratchet Stop

Item Code: 350-351-30

0.118 Inch (3mm) Diameter Rod Anvil for Uni-Mike

Item Code: 201217

24 Inch, 4R Graduation, Steel Rule, 13/16 Inch Wide, Rigid, Satin Chrome Finish Tempered Stainless Steel, (1/8, 1/16, 1/32, 1/64)

Item Code: 182-161

24 Inch, 16R Graduation, Steel Rule, 13/16 Inch Wide, Rigid, Satin Chrome Finish Tempered Stainless Steel, (1/32, 1/60, 1/50, 1/100)

Item Code: 182-162

0-6 Inch(150mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, With SPC Data Output, Carbide OD/ID Jaws

Item Code: 500-175-30

0-18 Inch(450mm), 0.0005 Inch(0.01mm), ABSOLUTE Digimatic Caliper, With SPC Data Output, No Thumb Roller

Item Code: 500-505-10

1/64 Inch -1/2 Inch, Concave/Convex Radius Gage Set, 25 Leaves (1/64 Inch to 17/64 Inch by 64ths, 9/32 Inch to 1/2 Inch by 32nds), With Holder

Item Code: 186-901

0.093-1 Inch Measuring Range, 0.0001 Graduation, Ratchet Thimble, Carbide Face, 3-Flute V-Anvil Micrometer

Item Code: 114-202

60mm Length Carbide-Tipped Height Gage Scriber for 192/570/574 Series Inch Height Gage Models

Item Code: 900258

0-1 Inch, 0.00005 Inch, Digimatic Spherical Face Micrometer, Carbide Steel Tip, Spherical Anvil Spherical Spindle, .59 Inch Max Inside Diameter, With SPC Data Output, Ratchet Stop

Item Code: 395-371-30

0-1 Inch Measuring Range, 0.0001 Graduation, Friction Thimble, Carbide Face, Multi-Anvil Micrometer

Item Code: 117-107

0-1 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, 15 Degree, Point Micrometer

Item Code: 112-189

0.7 Inch - 1.4 Inch Dial Bore Gage, Indicator Not Included

Item Code: 511-731

0.40 Inch - 1.2 Inch, 0.0002 Inch, Dial Caliper Gage

Item Code: 209-352

0-4 Inch Measuring Range, Ratchet Thimble, 2.5 Inch Base, Mechanical Depth Micrometer

Item Code: 129-127

0-6 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, Interchangeable Anvil Micrometer

Item Code: 104-137

1.6 Inch - 2 Inch, 0.00005 Inch, Digimatic Holtest, Titanium Nitride Coated Contact Points, With SPC Output, Ratchet Stop

Item Code: 468-269

2.5 Inch - 3 Inch, 0.00005 Inch, Digimatic Holtest, Titanium Nitride Coated Contact Points, With SPC Output, Ratchet Stop

Item Code: 468-271

0 Inch -1/4 Inch, 0.001 Inch, Mechanical Micrometer Head, 1/4 Inch Diameter Stem with Clamp Nut, Flat Spindle Face

Item Code: 148-204

150 x 150mm Comparator Stand, For Indicators and Linear Gages, Serrated Anvils, 3/8 Inch and 8/20mm Diameter Stem Holes, 275mm Travel, With Fine Feed Adjustment Over Entire Travel

Item Code: 215-505-10

0.03 Inch, Dial Test Indicator, Full Set 0-15-0, 0.0005 Inch Graduation, 3/8 Inch Stems, 0.079 Inch/.039 Inch/.118 Inch Contact Points, Clamp and Hold Bar, 19.9mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-402T

0 Inch -1 Inch Outside Diameter, 0.055 Inch - 1.05 Inch Inside Diameter, 0.001 Inch, Mechanical Groove Micrometer, 0.25 Inch Diameter Flange, Non-Rotating Spindle

Item Code: 146-231

0-1 Inch, 0.00005 Inch, IP65 Digimatic Disk Micrometer, .787 Inch/20mm Diameter .028 Inch/0.7mm Edge Thickness Disk, With SPC Data Output, Ratchet Stop

Item Code: 323-350-30

3-4 Inch Measuring Range, 0.0001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

Item Code: 103-218

0-40 Inch(1000mm), 0.0005 Inch(0.01mm), ABSOLUTE Digimatic Caliper, With SPC Data Output, No Thumb Roller

Item Code: 500-507-10

0.03 In, Dial Test Indicator, Basic Set 0-15-0, 0.0005 Inch Graduation, 3/8 Inch Stem, 0.079 Inch Contact Point, 19.9mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-402-10E

6 Inch, 150mm, Pocket Steel Rule, 1/2 Inch Wide , Pocket Clip, (1/64,1mm)

Item Code: 950-300

0-1 Inch, 0.00005 Inch, IP65 Uni-Mike Digimatic Interchangeable Anvil Micrometer, With SPC Data Output, Friction Thimble, Flat and Rod Anvils Included

Item Code: 317-351-30

0-1 Inch Measuring Range, 0.0001 Graduation, Ratchet Thimble, Carbide Face, Ball Anvil Micrometer

Item Code: 115-153

0-6 Inch(150mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, With SPC Data Output, Carbide OD Jaws

Item Code: 500-174-30

6-7 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

Item Code: 103-183

7-8 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

Item Code: 103-184

0-12 Inch, 0.001 Inch Dial Caliper, 0.1 Inch/Revolution, White Face, Carbide OD

Item Code: 505-747

0-24 Inch, 0.001 Inch Graduation, Dial Height Gage, With Dual Digit Counters, With Carbide Tipped Scriber

Item Code: 192-152

0-1 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, 30 Degree, Point Micrometer

Item Code: 112-237

1/32 Inch - 1/4 Inch, Concave/Convex Radius Gage Set, 15 Pairs of Leaves (1/32 Inch to 1/4 Inch by 64ths), Locking Clamp

Item Code: 186-101

0-1 Inch Measuring Range, 0.0001 Graduation, Ratchet Thimble, Carbide Face, Tubing Micrometer

Item Code: 115-313

0 to 1 Inch Range, 0.0005 Inch Resolution, Electronic Drop Indicator

Item Code: 575-123

2 Inch - 3 Inch Dial Snap Gage, 3/8 Inch Stem Diameter, Indicator Not Included

Item Code: 201-153

0.008 Inch, Dial Test Indicator, Full Set 0-4-0, 0.0001 Graduation, 3/8 Inch Stems, 0.079 Inch/.039 Inch/.118 Inch Contact Points, Clamp and Hold Bar, 15mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-403-10T

0.8mm, Dial Test Indicator,Basic Set 0-40-0, 0.01mm Graduation, 8mm Stem, 2mm Contact Point, 20.9mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-404E

0-4 Inch, .001 Inch Mechanical Outside Micrometer Set, Hammertone Baked Enamel, 4 gages, with 3 standards

Item Code: 103-930

0 Inch - 2 Inch (0-50mm) Micrometer Stand, Fixed Angle With Platform for 3-Wire Measurement

Item Code: 156-106

0.03 Inch Range, 0.0005 Inch Dial Graduation, Horizontal Dial Test Indicator

Item Code: 513-412T

150mm Length Carbide Tipped Height Gage Scriber for 192/570 Series Inch Height Gage Models

Item Code: 905201