0-25mm, 0.01mm, Mechanical Micrometer Head, 12mm Diameter Plain Stem, Flat Carbide Tipped Spindle Face, Non-Rotating Spindle

Item Code: 153-203

0-1 Inch, 0.00005 Inch, Digimatic Disk Micrometer, .787 Inch/20mm Diameter .028 Inch/0.7mm Edge Thickness Disk, Non-Rotating Spindle, With SPC Data Output, Ratchet Stop

Item Code: 369-350-30

0-12 Inch, .0001 Inch Mechanical Outside Micrometer Set, Hammertone Baked Enamel, 12 gages, with 11 standards

Item Code: 103-908-40

0.55 Inch - 1 Inch, Concave/Convex Radius Gage Set, 10 Leaves (.550 Inch to 1 Inch by .050), With Holder

Item Code: 186-907

3 Inch (75mm) Depth Base Attachment, For 4, 6, 8 Inch/100, 150, 200mm Calipers

Item Code: 050083-10

5 Inch (125mm) Depth Base Attachment, For 12 Inch/300mm Calipers

Item Code: 050085-10

0-12 Inch Measuring Range, Ratchet Thimble, 4 Inch Base, Mechanical Depth Micrometer

Item Code: 129-150

0-8 Inch(200mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, With SPC Data Output

Item Code: 500-172-30

3-4 Inch, 0.0001 Inch Digit Counter Outside Micrometer, Carbide Tip, Ratchet Stop, With Standard

Item Code: 193-214

0 to 1 Inch Range, 0.0001 Inch Resolution, Standard Throat, IP65 Electronic Outside Micrometer

Item Code: 293-340-30

0 to 1 Inch Range, 0.0001 Inch Resolution, Standard Throat, IP65 Electronic Outside Micrometer

Item Code: 293-344-30

0-6 Inch(150mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, No Output, Carbide OD/ID Jaws

Item Code: 500-160-30

0-3 Inch, 0.00005 Inch, IP65 Digimatic Outside Micrometer Set, 3 Micrometers, 2 Standard Bars, With SPC Data Output, Ratchet Stop

Item Code: 293-960-30

0-4 Inch, 0.00005 Inch, IP65 Digimatic Outside Micrometer Set, 4 Micrometers, 3 Standard Bars, With SPC Data Output, Ratchet Stop

Item Code: 293-961-30

3-4 Inch/76.2-101.6mm, 0.00005 In/0.001mm IP65 Digimatic Outside Micrometer, With SPC Data Output, Ratchet Stop, With Standard

Item Code: 293-333-30

.04-1.5 Inch/ 1-38mm Diameter, Height Gage Center Master, With Inch Type Hold Bar

Item Code: 900581

1-2 Inch/25.4-50.8mm, 0.00005 In/0.001mm IP65 Digimatic Outside Micrometer, With SPC Data Output, Friction, With Standard

Item Code: 293-336-30

2 Inch - 2.5 Inch, 0.0002 Inch, Holtest, Type II, Alloyed Steel Contact Points, Ratchet Stop

Item Code: 368-870

1.6 Inch - 2 Inch, 0.0002 Inch, Holtest, Type II, Alloyed Steel Contact Points, Ratchet Stop

Item Code: 368-869

0-1 Inch, 0.00005 Inch, Digimatic Outside Micrometer, Non-Rotating Spindle, With SPC Data Output, Ratchet Stop

Item Code: 406-350-30

50mm Detector Extension Rod, For SJ-210 and SJ-310 Detectors

Item Code: 12AAA210

U-Wave-T, Tool Connect Cable E

Item Code: 02AZD790C

0 to 1 Inch Range, 0.0001 Inch Resolution, Standard Throat, IP65 Electronic Outside Micrometer

Item Code: 293-180

2 Inch - 3 Inch/50.8mm-76.2mm, 0.00005 In/0.001mm IP65 QuantuMike Digimatic Outside Micrometer, With SPC Data Output, Ratchet Thimble, With Standard

Item Code: 293-182

3 Inch - 4 Inch/76.2mm-101.6mm, 0.00005 Inch/0.001mm IP65 QuantuMike Digimatic Outside Micrometer, With SPC Data Output, Ratchet Thimble, With Standard

Item Code: 293-183

2-8 Inch, .001 Inch, Mechanical Extention Rod Type Inside Micrometer, Extention Rods (3)

Item Code: 141-208

0-12 Inch, 0.00005 Inch, Digimatic Depth Micrometer, 12 interchangeable rods (1 Inch/25.4mm increments), Rod Clamp, 4 Inch Base, With SPC Data Output, Ratchet Stop

Item Code: 329-351-30

0-1 Inch, 0.00005 Inch, Digimatic Lite Outside Micrometer, No Spindle Clamp, No Output, Ratchet Stop

Item Code: 293-831-30

5 Inch, Micrometer Standard Bar, .31 In, Diameter

Item Code: 167-145

47mm Length Carbide-Tipped Height Gage Scriber for 570/506/509 Series Inch Height Gage Models

Item Code: 900173

0.5 Inch - 0.65 Inch, 0.0001 Inch, Holtest, Titanium Nitride Coated Contact Points, Ratchet Stop

Item Code: 368-264

0 to 8 Inch, Stainless Steel, Electronic Depth Gage

Item Code: 571-212-30

0 to 6 Inch, Stainless Steel, Electronic Depth Gage

Item Code: 571-211-30

8-20 Inch, .001 Inch, Mechanical Extention Rod Type Inside Micrometer, Extention Rods (3)

Item Code: 141-121

0-6 Inch(150mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, With SPC Data Output

Item Code: 500-171-30

2 Inch - 3 Inch, 0.00005 Inch, Dial Indicating Micrometer, Carbide Steel Tip, With Standard

Item Code: 510-133

8 Inch Range, 0.0005 Inch Resolution, Electronic Height Gage

Item Code: 570-244

8-9 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

Item Code: 103-185

0-25mm, 0.001mm Digit Counter Outside Micrometer, Carbide Tip, Ratchet Stop

Item Code: 193-111

1 mm Range, 0.01 mm Dial Graduation, Horizontal Dial Test Indicator

Item Code: 513-415

1.0000 to 60 Inch Range, 0.0005 Inch Resolution, IP66 Electronic Caliper

Item Code: 552-315-10

0.03 In, Dial Test Indicator, Magnetic Stand Set 0-15-0, 0.0005 Inch Graduation, 3/8 Inch Stem, .079 Inch Contact Point, 19.9mm Length, Anti-Magnet, Jeweled Bearing

Item Code: 513-907

0-4 Inch(100mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, No Output, .075 In Round Depth Bar

Item Code: 500-195-30

0-12 Inch, 0.001 Inch Dial Caliper, 0.1 Inch/Revolution

Item Code: 505-746

0-4 Inch(100mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, With SPC Data Output, .075 Inch Round Depth Bar

Item Code: 500-170-30

1 to 2 Inch Range, 0.0001 Inch Resolution, Standard Throat, IP65 Electronic Outside Micrometer

Item Code: 293-345-30

1-2 Inch, 0.00005 Inch, Digimatic Outside Micrometer, Non-Rotating Spindle, With SPC Data Output, Ratchet Stop

Item Code: 406-351-30

0-1 Inch, 0.00005 Inch, Digimatic Spline Micrometer, 3mm Diameter Spline, Carbide Steel Tip, With SPC Data Output, Ratchet Stop

Item Code: 331-351-30

U-Wave-T, Tool Connect Cable F

Item Code: 02AZD790F

0.65 Inch - 0.8 Inch, 0.00005 Inch, Digimatic Holtest, Titanium Nitride Coated Contact Points, With SPC Output, Ratchet Stop

Item Code: 468-265