0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut x 60 Deg. Included Mill Style 4 Flute AlTiN Coated Carbide Drill/End Mill

Item Code: 15416-C3

0.0450 in. Drill Diameter x 0.1350 in. Flute Length 90 Deg. 2 Flute Carbide Spot Drill

Item Code: 11445-HARVEY

0.1250 in. (1/8) Drill Diameter x 0.3750 in. (3/8) Flute Length 90 Deg. 2 Flute Carbide Spot Drill

Item Code: 11525-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.0312 in. (1/32) Radius x 0.3750 in. (3/8) Neck Length 6 Flute AlTiN Coated Carbide Full Radius Keyseat Cutter

Item Code: 43331-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0600 in. Length of Cut 2 Flute Carbide Square End Mill

Item Code: 72020

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.7500 in. (3/4) Reach 3 Flute Carbide Ball End Mill

Item Code: 35662-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.7500 in. (3/4) Length of Cut 4 Flute Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 36215-C4

0.0150 in. (1/64) Radius x 0.0460 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 17015-C3

0.0310 in. (1/32) Cutter Diameter x 0.0050 in. Radius x 0.0460 in. Length of Cut x 0.3750 in. (3/8) Reach 3 Flute Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 39431-C4

0.5000 in. (1/2) Shank Diameter x 41 Deg. Per Side 4 Flute Carbide Flat Chamfer Cutter

Item Code: 18341-HARVEY

0.0470 in. (3/64) Radius x 0.2150 in. Length of Cut x 15 Deg. Per Side 2 Flute Carbide Runner Cutter

Item Code: 75103-HARVEY

0.3750 in. (3/8) Cutter Diameter x 1.5000 in. (1-1/2) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 29524-C3

0.5000 in. (1/2) Cutter Diameter x 2.0000 in. (2) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 29532-C3

0.1250 in. (1/8) Cutter Diameter x 1.0000 in. (1) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 29508-C3

0.0100 in. Cutter Diameter x 0.0300 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 73010-C3