0.1250 in. (1/8) Cutter Diameter x 0.1880 in. Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 17808-C6

0.0930 in. (3/32) Cutter Diameter x 0.1400 in. (9/64) Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 17793-C6

0.0310 in. (1/32) Cutter Diameter x 0.0460 in. Length of Cut x 0.4700 in. Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 48931-C4

0.2500 in. (1/4) Cutter Diameter x 0.1250 in. (1/8) Width x 0.1250 in. (1/8) Neck Length 6 Flute Carbide Square Deep Keyseat Cutter

Item Code: 70895

0.3750 in. (3/8) Shank Diameter x 60 Deg. Per Side 3 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 18460-C3

0.0500 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.6250 in. (5/8) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16050-HARVEY

0.0500 in. Radius x 0.1250 in. (1/8) Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 45350-HARVEY

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.1870 in. (3/16) Neck Length 6 Flute Carbide Full Radius Keyseat Cutter

Item Code: 67510-HARVEY

0.0310 in. (1/32) Cutter Diameter x 0.0460 in. Length of Cut x 0.4700 in. Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 48931-C3

0.3750 in. (3/8) Cutter Diameter x 0.0469 in. (3/64) Radius x 1.1250 in. (1-1/8) Neck Length 6 Flute AlTiN Coated Carbide Full Radius Keyseat Cutter

Item Code: 968547-C3

0.3125 in. (5/16) Cutter Diameter x 0.0150 in. (1/64) Width x 0.4680 in. (15/32) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22403-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.7500 in. (3/4) Reach 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 65462-C3

3.000 in. Overall Length Extended Reach Tool Holder

Item Code: 36730

0.0250 in. Cutter Diameter x 0.0380 in. Length of Cut x 0.1250 in. (1/8) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 33225-C3

0.2500 in. (1/4) Cutter Diameter x 0.0469 in. (3/64) Radius x 0.3750 in. (3/8) Neck Length 6 Flute Carbide Full Radius Keyseat Cutter

Item Code: 67747