0.3750 in. (3/8) Cutter Diameter x 1.1250 in. (1-1/8) Length of Cut 1 Flute Amorphous Diamond Coated Carbide Square Upcut End Mill

Item Code: 51524-C4

0.5000 in. (1/2) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 1 Flute Amorphous Diamond Coated Carbide Square Upcut End Mill

Item Code: 51532-C4

0.0650 in. Cutter Diameter x 0.0200 in. Radius x 0.1950 in. Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 51665

0.0650 in. Cutter Diameter x 0.0200 in. Radius x 0.1950 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 51665-C3

0.1875 in. (3/16) Shank Diameter x 0.0150 in. (1/64) Radius x 60 Deg. Included 1 Flute Carbide Radius Engraver

Item Code: 51720

0.1875 in. (3/16) Shank Diameter x 0.0150 in. (1/64) Radius x 60 Deg. Included 1 Flute AlTiN Coated Carbide Radius Engraver

Item Code: 51720-C3

0.2500 in. (1/4) Shank Diameter x 0.0150 in. (1/64) Radius x 60 Deg. Included 1 Flute AlTiN Coated Carbide Radius Engraver

Item Code: 51730-C3

0.1090 in. (7/64) Cutter Diameter x 0.0100 in. Radius x 0.1640 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52702-C3

0.1406 in. (9/64) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2200 in. Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52709-C3

0.0500 in. Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 52850-C3

0.0500 in. Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 52850-HARVEY

0.0700 in. Cutter Diameter x 0.0100 in. Radius x 0.3750 in. (3/8) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53670-C6

0.1406 in. (9/64) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53709-C6

0.1000 in. Cutter Diameter x 0.0100 in. Radius x 0.5000 in. (1/2) Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53900-C3

0.0310 in. (1/32) Radius x 0.0200 in. (.5 mm) Pilot Diameter x 1.1250 in. (1-1/8) Reach 2 Flute Carbide Corner Rounding End Mill

Item Code: 54331-HARVEY