0.0930 in. (3/32) Radius x 0.0580 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 67693-HARVEY

0.0390 in. (1 mm) Cutter Diameter x 0.0310 in. (1/32) Length of Cut x 0.2030 in. (13/64) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 38739-C6

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 0.6250 in. (5/8) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 38808-C6

0.1875 in. (3/16) Cutter Diameter x 0.0050 in. Radius x 0.2850 in. Length of Cut x 1.5000 in. (1-1/2) Reach 3 Flute TiB2 Coated Carbide V-Helix Corner Radius End Mill

Item Code: 961412-C8

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 2 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 74125-C3

0.0390 in. (1 mm) Cutter Diameter x 0.0580 in. Length of Cut 4 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 24639-C3

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 974316-C3

0.1600 in. Cutter Diameter x 0.8750 in. (7/8) Reach 4 Flute AlTiN Coated Carbide Single Form #12 Thread Milling Cutter

Item Code: 54245-C3

0.0620 in. (1/16) Cutter Diameter x 0.0200 in. Radius x 0.0930 in. (3/32) Length of Cut x 0.3120 in. (5/16) Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 953562

0.1250 in. (1/8) Cutter Diameter x 0.0300 in. Radius x 0.3750 in. (3/8) Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 70708

0.2500 in. (1/4) Cutter Diameter x 0.0720 in. Width x 0.6250 in. (5/8) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 984403-C3

0.5000 in. (1/2) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 1 Flute Carbide Square Upcut End Mill

Item Code: 51232-HARVEY

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 52924-C3

0.5000 in. (1/2) Cutter Diameter x 0.0350 in. Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22612-C3

2.286 mm Drill Diameter x 15.000 mm Flute Length 3 Flute TiB2 Coated Carbide Miniature High Performance Drill

Item Code: BAF0900-C8