0.0450 in. Cutter Diameter x 0.4500 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide Tapered Ball End Mill

Item Code: 32645-C6

0.0600 in. Cutter Diameter x 0.6000 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide Tapered Ball End Mill

Item Code: 32660-C6

0.0600 in. Cutter Diameter x 0.6000 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide Tapered Ball End Mill

Item Code: 34460-C6

0.0930 in. (3/32) Cutter Diameter x 0.0200 in. Radius x 0.1400 in. (9/64) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 966493-C3

0.0500 in. Cutter Diameter x 0.0100 in. Radius x 0.0750 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 994550-C3

0.0310 in. (1/32) Cutter Diameter x 0.1550 in. Length of Cut x 0.3100 in. Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 13831-C3

0.2500 in. (1/4) Cutter Diameter x 0.0400 in. Width x 0.3750 in. (3/8) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22340-C3

0.0750 in. (1.9 mm) Cutter Diameter x 0.2250 in. Length of Cut 2 Flute Carbide Square End Mill

Item Code: 72075

0.1250 in. (1/8) Radius x 0.6250 in. (5/8) Cutter Diameter 4 Flute AlTiN Coated Carbide Concave Radius End Mill

Item Code: 32808-C3

0.0470 in. (3/64) Cutter Diameter x 0.0080 in. Radius x 0.0380 in. Length of Cut x 0.3750 in. (3/8) Reach 4 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 999047-C6

0.0470 in. (3/64) Cutter Diameter x 0.0080 in. Radius x 0.0380 in. Length of Cut x 0.2500 in. (1/4) Reach 4 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 996347-C6

1.092 mm Drill Diameter x 15.000 mm Flute Length 3 Flute TiB2 Coated Carbide Miniature High Performance Drill

Item Code: DQW0430-C8

3.000 mm Cutter Diameter x 0.100 mm Radius x 9.000 mm Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Corner Radius End Mill

Item Code: 973557-C8

0.3120 in. (5/16) Radius x 0.4060 in. (13/32) Pilot Diameter 3 Flute Carbide Tipped 5 Deg. Flare Corner Rounding End Mill

Item Code: 45020-HARVEY

3.000 mm Cutter Diameter x 15.000 mm Length of Cut 5 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 980157-C6