0.1406 in. (9/64) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2200 in. Length of Cut x 1.1250 in. (1-1/8) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 43009-C3

0.1406 in. (9/64) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2200 in. Length of Cut x 1.1250 in. (1-1/8) Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 43009-HARVEY

0.3125 in. (5/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.4700 in. Length of Cut x 2.5000 in. (2-1/2) Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 43020

0.3125 in. (5/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.4700 in. Length of Cut x 2.5000 in. (2-1/2) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 43020-C3

0.5000 in. (1/2) Cutter Diameter x 0.0050 in. Radius x 0.1870 in. (3/16) Width x 0.7500 in. (3/4) Neck Length 8 Flute Carbide Corner Radius Stagger Keyseat Cutter

Item Code: 44370-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.0100 in. Radius x 0.0310 in. (1/32) Width x 0.3750 in. (3/8) Neck Length 6 Flute AlTiN Coated Carbide Corner Radius Stagger Keyseat Cutter

Item Code: 44531-C3

0.2500 in. (1/4) Cutter Diameter x 0.0100 in. Radius x 0.0310 in. (1/32) Width x 0.3750 in. (3/8) Neck Length 6 Flute Carbide Corner Radius Stagger Keyseat Cutter

Item Code: 44531-HARVEY

0.5000 in. (1/2) Cutter Diameter x 0.0100 in. Radius x 0.1870 in. (3/16) Width x 0.7500 in. (3/4) Neck Length 8 Flute Carbide Corner Radius Stagger Keyseat Cutter

Item Code: 44670

0.5000 in. (1/2) Cutter Diameter x 0.0100 in. Radius x 0.1870 in. (3/16) Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Corner Radius Stagger Keyseat Cutter

Item Code: 44670-C3

0.4370 in. (7/16) Radius x 0.4060 in. (13/32) Pilot Diameter 3 Flute AlTiN Coated Carbide Tipped 5 Deg. Flare Corner Rounding End Mill

Item Code: 45028-C3

0.6250 in. (5/8) Radius x 0.6560 in. (21/32) Pilot Diameter 3 Flute AlTiN Coated Carbide Tipped 5 Deg. Flare Corner Rounding End Mill

Item Code: 45040-C3

0.0310 in. (1/32) Cutter Diameter x 0.0150 in. (1/64) Width x 0.0930 in. (3/32) Neck Length 2 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 45131

0.0310 in. (1/32) Cutter Diameter x 0.0150 in. (1/64) Width x 0.0930 in. (3/32) Neck Length 2 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 45131-C3

0.0180 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 45318-C3

0.0180 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 45318-HARVEY