#38 Diameter, 5xD Drill, 2 flutes, Carbide, Bright Finish, Straight Shank, 118° Point, Right Hand Cut

Item Code: 732-2.58

#20 Diameter, 5xD Drill, 2 flutes, Carbide, Bright Finish, Straight Shank, 118° Point, Right Hand Cut

Item Code: 732-4.09

0.7mm Diameter Taper Length Drill, 2 flutes, HSCO, Bright Finish, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-0.70

21/32 Inch Diameter, Drill Body, 2 flutes, Carbide, FIREX Coated, 140° Point, Right Hand Cut

Item Code: 4112-16.67

16.505mm Diameter 5xD Drill, 2 flutes, tool steel, nickel-plated Coated, with Coolant, Whistle Notch Shank, Right Hand Cut

Item Code: 4108-16.505

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0197 chamfer

Item Code: 3188-12.70

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0118 chamfer

Item Code: 3188-9.52

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 30° Helix Angle, 0.0197 chamfer

Item Code: 3188-15.87

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3155-4.76

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1-5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3155-9.52

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 1-1/2 Overall Length, 48° Helix Angle, 0.002 chamfer

Item Code: 6773-3.17

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 48° Helix Angle, 0.002 chamfer

Item Code: 6773-4.76

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 48° Helix Angle, 0.004 chamfer

Item Code: 6773-6.35

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 48° Helix Angle, 0.006 chamfer

Item Code: 6773-9.52

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/2 Overall Length, 48° Helix Angle, 0.007 chamfer

Item Code: 6773-12.70