0.0800 in. Drill Diameter x 0.2400 in. Flute Length 90 Deg. 2 Flute AlTiN Coated Carbide Spot Drill

Item Code: 11480-C3

0.0800 in. Drill Diameter x 0.2400 in. Flute Length 90 Deg. 2 Flute Carbide Spot Drill

Item Code: 11480-HARVEY

0.0600 in. Cutter Diameter x 0.0050 in. Radius x 0.3120 in. (5/16) Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53060-C8

0.1875 in. (3/16) Shank Diameter x 60 Deg. Included 2 Flute Carbide Marking Cutter

Item Code: 48312

0.0930 in. (3/32) Cutter Diameter x 0.5000 in. (1/2) Length of Cut x 0.9500 in. Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 956393-C3

0.5000 in. (1/2) Cutter Diameter x 0.1250 in. (1/8) Width x 0.7500 in. (3/4) Neck Length 6 Flute Carbide Square Keyseat Cutter for Non-Ferrous

Item Code: 988960

0.1560 in. (5/32) Radius x 0.1070 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 68156-HARVEY

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.7500 in. (3/4) Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 35462-C4

0.600 mm Drill Diameter x 4.000 mm Flute Length 3 Flute TiB2 Coated Carbide Miniature High Performance Drill

Item Code: BAF0236-C8

0.0400 in. Cutter Diameter x 0.1200 in. Length of Cut x 0.4800 in. Reach 4 Flute Carbide Square End Mill

Item Code: 992540

0.0930 in. (3/32) Drill Diameter x 0.2790 in. Flute Length 90 Deg. 2 Flute Carbide Spot Drill

Item Code: 11493-HARVEY

0.0930 in. (3/32) Drill Diameter x 0.2790 in. Flute Length 90 Deg. 2 Flute AlTiN Coated Carbide Spot Drill

Item Code: 11493-C3

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.2810 in. (9/32) Neck Length 6 Flute AlTiN Coated Carbide Full Radius Keyseat Cutter

Item Code: 68310-C3

0.2500 in. (1/4) Cutter Diameter x 0.0310 in. (1/32) Width x 0.1250 in. (1/8) Neck Length 6 Flute Carbide Square Deep Keyseat Cutter

Item Code: 70831-HARVEY

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.6250 in. (5/8) Reach 3 Flute AlTiN Coated Carbide V-Helix Square End Mill

Item Code: 931162-C3