Show Results For
Brand
Sort Results By:
Relevance Popularity Item Code
Showing: 83,116-83,130 of 100,000
15 25 50
no-image

2.2mm Diameter Taper Length Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-2.200

Unit Size: 1

no-image

2.3mm Diameter Taper Length Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-2.300

Unit Size: 1

no-image

2.4mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-2.400

Unit Size: 1

no-image

2.45mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-2.450

Unit Size: 1

no-image

2.5mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-2.500

Unit Size: 1

no-image

2.6mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-2.600

Unit Size: 1

no-image

2.7mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-2.700

Unit Size: 1

no-image

2.8mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-2.800

Unit Size: 1

no-image

2.9mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-2.900

Unit Size: 1

no-image

7/16 Inch Diameter Endmill, 7/16 Shank, 3 flutes, 1 Length of Cut, Carbide, HA Shank, 2-3/4 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3172-11.110

Unit Size: 1

no-image

1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 1 Length of Cut, Carbide, HA Shank, 3 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3172-12.700

Unit Size: 1

no-image

5/8 Inch Diameter Endmill, 5/8 Shank, 3 flutes, 1-1/4 Length of Cut, Carbide, HA Shank, 3-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3172-15.870

Unit Size: 1

no-image

3/4 Inch Diameter Endmill, 3/4 Shank, 3 flutes, 1-1/2 Length of Cut, Carbide, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3172-19.050

Unit Size: 1

no-image

1 Inch Diameter Endmill, 1 Shank, 3 flutes, 1-1/2 Length of Cut, Carbide, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0118 chamfer

Item Code: 3172-25.400

Unit Size: 1

no-image

3/16 Inch Diameter Endmill, 3/16 Shank, 3 flutes, 5/8 Length of Cut, Carbide, HA Shank, 2 Overall Length, 45° Helix Angle, 0.002 chamfer

Item Code: 3172-4.760

Unit Size: 1

Showing: 83116-83130 of 100000