0.1875 in. (3/16) Cutter Diameter x 0.2810 in. (9/32) Length of Cut 4 Flute Carbide Reduce Shank Square End Mill

Item Code: 920613

0.2500 in. (1/4) Cutter Diameter x 0.1250 in. (1/8) Width x 0.1870 in. (3/16) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 946903-C3

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.1170 in. Length of Cut x 0.4060 in. (13/32) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 37178-C3

0.0600 in. Cutter Diameter x 0.3120 in. (5/16) Length of Cut 3 Flute Carbide Square End Mill

Item Code: 31860

0.5000 in. (1/2) Shank Diameter x 15 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 960415-C3

0.0780 in. (5/64) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1170 in. Length of Cut x 0.8000 in. Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 965678-C3

0.0780 in. (5/64) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1170 in. Length of Cut x 0.9400 in. Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 43178-C3

0.0220 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

Item Code: 46022-C3

0.2500 in. (1/4) Cutter Diameter x 0.6250 in. (5/8) Neck Length x 300 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 979216-C3

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2810 in. (9/32) Length of Cut 4 Flute Carbide Reduce Shank Corner Radius End Mill

Item Code: 17612-HARVEY

0.1875 in. (3/16) Cutter Diameter x 0.0780 in. (5/64) Width x 0.2810 in. (9/32) Neck Length 6 Flute Carbide Square Keyseat Cutter

Item Code: 22278

0.0310 in. (1/32) Cutter Diameter x 0.0460 in. Length of Cut x 0.3120 in. (5/16) Reach 3 Flute Carbide Ball End Mill

Item Code: 966031

0.1875 in. (3/16) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 33712-C3

0.5000 in. (1/2) Cutter Diameter x 0.0050 in. Radius x 0.0930 in. (3/32) Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Corner Radius Stagger Keyseat Cutter

Item Code: 44350-C3

0.7500 in. (3/4) Cutter Diameter x 0.0625 in. (1/16) Radius 6 Flute AlTiN Coated Carbide Full Radius Reduced Shank Keyseat Cutter

Item Code: 32904-C3