0.1250 in. (1/8) Shank Diameter x 0.0200 in. Radius x 90 Deg. Included 2 Flute AlTiN Nano Coated Carbide Radius Engraver For Hardened Steels

Item Code: 837108-C6

0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 90 Deg. Included 2 Flute AlTiN Nano Coated Carbide Radius Engraver For Hardened Steels

Item Code: 837116-C6

0.1870 in. Cutter Diameter x 0.0100 in. Radius x 0.0620 in. (1/16) Width x 0.0930 in. (3/32) Neck Length 6 Flute Carbide Corner Radius Deep Keyseat Cutter

Item Code: 837262

0.1870 in. Cutter Diameter x 0.0100 in. Radius x 0.0620 in. (1/16) Width x 0.0930 in. (3/32) Neck Length 6 Flute AlTiN Coated Carbide Corner Radius Deep Keyseat Cutter

Item Code: 837262-C3

0.0937 in. (3/32) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 837393

0.0937 in. (3/32) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 837393-C3

0.0937 in. (3/32) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute TiB2 Coated Carbide Undercutting End Mill

Item Code: 837393-C8

0.1250 in. (1/8) Shank Diameter x 0.0050 in. Radius x 40 Deg. Included 2 Flute AlTiN Nano Coated Carbide Radius Engraver For Hardened Steels

Item Code: 837508-C6

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.0310 in. (1/32) Width x 0.0620 in. (1/16) Neck Length 6 Flute Carbide Corner Radius Deep Keyseat Cutter

Item Code: 837631

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.0310 in. (1/32) Width x 0.0620 in. (1/16) Neck Length 6 Flute AlTiN Coated Carbide Corner Radius Deep Keyseat Cutter

Item Code: 837631-C3

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.0620 in. (1/16) Width x 0.0620 in. (1/16) Neck Length 6 Flute Carbide Corner Radius Deep Keyseat Cutter

Item Code: 837662

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.0620 in. (1/16) Width x 0.0620 in. (1/16) Neck Length 6 Flute AlTiN Coated Carbide Corner Radius Deep Keyseat Cutter

Item Code: 837662-C3

6.000 Mm Shank Diameter x 45 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 837745

6.000 Mm Shank Diameter x 45 Deg. Per Side 3 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 837745-C3

0.0310 in. (1/32) Cutter Diameter x 0.2810 in. (9/32) Length of Cut 3 Flute Carbide Square End Mill

Item Code: 837831