0.2500 in. (1/4) Cutter Diameter x 0.0200 in. Radius x 0.3750 in. (3/8) Neck Length 6 Flute AlTiN Coated Carbide Full Radius Keyseat Cutter

Item Code: 67720-C3

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 1.0000 in. (1) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 32108-C6

0.0950 in. Cutter Diameter x 0.1420 in. Length of Cut x 0.5000 in. (1/2) Reach 3 Flute Carbide Ball End Mill

Item Code: 33495

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 0.5 Deg. 1.8320 in. Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 998754-C6

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Radius x 0.0930 in. (3/32) Length of Cut x 0.3120 in. (5/16) Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 62462-C3

0.3750 in. (3/8) Cutter Diameter x 0.7500 in. (3/4) Neck Length x 220 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 22824-C3

0.1562 in. (5/32) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.5620 in. (9/16) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 75215-C3

0.0469 in. (3/64) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 52847-C3

0.2400 in. Cutter Diameter x 0.7500 in. (3/4) Reach 4 Flute AlTiN Coated Carbide Single Form #5/16 Thread Milling Cutter

Item Code: 41455-C3

0.0250 in. Cutter Diameter x 0.0370 in. Length of Cut x 0.2030 in. (13/64) Reach 3 Flute Carbide Ball End Mill

Item Code: 34225-HARVEY

0.3750 in. (3/8) Cutter Diameter x 0.0680 in. Width x 0.2500 in. (1/4) Neck Length 8 Flute AlTiN Coated Carbide Retaining Ring Keyseat Cutter

Item Code: 23524-C3

0.0780 in. (5/64) Cutter Diameter x 0.2340 in. (15/64) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 970578-C6

0.1250 in. (1/8) Shank Diameter x 0.0050 in. Radius x 30 Deg. Included 1 Flute AlTiN Coated Carbide Radius Engraver

Item Code: 47510-C3

0.1250 in. (1/8) Shank Diameter x 10 Deg. Included 1 Flute Carbide Pointed Engraver

Item Code: 996508

0.7500 in. (3/4) Cutter Diameter x 0.0930 in. (3/32) Width 10 Flute AlTiN Coated Carbide Square Reduced Shank Keyseat Cutter

Item Code: 52040-C3