0.1875 in. (3/16) Cutter Diameter x 1.0000 in. (1) Length of Cut 3 Flute Amorphous Diamond Coated Carbide V-Helix Square End Mill

Item Code: 923112-C4

0.2500 in. (1/4) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 3 Flute Amorphous Diamond Coated Carbide V-Helix Square End Mill

Item Code: 923116-C4

0.0780 in. (5/64) Cutter Diameter x 0.0200 in. Radius x 0.1170 in. Length of Cut x 0.8000 in. Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 923278

0.0780 in. (5/64) Cutter Diameter x 0.0200 in. Radius x 0.1170 in. Length of Cut x 0.8000 in. Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 923278-C3

0.1250 in. (1/8) Cutter Diameter x 0.0200 in. Radius x 0.1870 in. (3/16) Length of Cut x 1.2500 in. (1-1/4) Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 923308

0.1250 in. (1/8) Cutter Diameter x 0.0200 in. Radius x 0.1870 in. (3/16) Length of Cut x 1.2500 in. (1-1/4) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 923308-C3

0.0400 in. Cutter Diameter x 0.0030 in. Radius x 0.1200 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 923640-C6

0.0470 in. (3/64) Cutter Diameter x 0.0030 in. Radius x 0.1410 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 923647-C6

0.0780 in. (5/64) Cutter Diameter x 0.0030 in. Radius x 0.2340 in. (15/64) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 923678-C6

0.0930 in. (3/32) Cutter Diameter x 0.0030 in. Radius x 0.2790 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 923693-C6

0.1250 in. (1/8) Cutter Diameter x 0.0030 in. Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 923708-C6

0.7500 in. (3/4) Cutter Diameter x 0.0100 in. Radius x 0.0780 in. (5/64) Width 10 Flute Carbide Corner Radius Reduced Shank Keyseat Cutter

Item Code: 923830

0.7500 in. (3/4) Cutter Diameter x 0.0100 in. Radius x 0.0780 in. (5/64) Width 10 Flute AlTiN Coated Carbide Corner Radius Reduced Shank Keyseat Cutter

Item Code: 923830-C3

0.1875 in. (3/16) Shank Diameter x 30 Deg. Included 2 Flute Carbide Marking Cutter

Item Code: 923912

0.1875 in. (3/16) Shank Diameter x 30 Deg. Included 2 Flute AlTiN Coated Carbide Marking Cutter

Item Code: 923912-C3