1 Inch Diameter Endmill, 1 Shank, 3 flutes, 1-1/2 Length of Cut, Carbide, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0118 chamfer

Item Code: 3168-25.400

1/8 Inch Diameter Endmill, 1/8 Shank, 3 flutes, 3/8 Length of Cut, Carbide, HA Shank, 1-1/2 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3168-3.170

3/16 Inch Diameter Endmill, 3/16 Shank, 3 flutes, 5/8 Length of Cut, Carbide, HA Shank, 2 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3168-4.760

1/4 Inch Diameter Endmill, 1/4 Shank, 3 flutes, 3/4 Length of Cut, Carbide, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3168-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 3 flutes, 13/16 Length of Cut, Carbide, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3168-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 3 flutes, 1 Length of Cut, Carbide, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3168-9.520

1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 3 Length of Cut, Carbide, HA Shank, 6 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3169-12.700

5/8 Inch Diameter Endmill, 5/8 Shank, 3 flutes, 3 Length of Cut, Carbide, HA Shank, 6 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3169-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 3 flutes, 3 Length of Cut, Carbide, HA Shank, 6 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3169-19.050

1 Inch Diameter Endmill, 1 Shank, 3 flutes, 3 Length of Cut, Carbide, HA Shank, 6 Overall Length, 30° Helix Angle, 0.0118 chamfer

Item Code: 3169-25.400

3/16 Inch Diameter Endmill, 3/16 Shank, 3 flutes, 1-1/4 Length of Cut, Carbide, HA Shank, 3 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3169-4.760

1/4 Inch Diameter Endmill, 1/4 Shank, 3 flutes, 1-5/8 Length of Cut, Carbide, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3169-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 3 flutes, 1-5/8 Length of Cut, Carbide, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3169-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 3 flutes, 1-5/8 Length of Cut, Carbide, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3169-9.520

0.5mm Diameter Taper Length Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-0.500