0.0620 in. (1/16) Cutter Diameter x 0.0050 in. Radius x 0.0930 in. (3/32) Length of Cut x 0.7500 in. (3/4) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 39462-C3

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.1170 in. Length of Cut x 0.9400 in. Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 39478-C3

0.1250 in. (1/8) Cutter Diameter x 0.0050 in. Radius x 0.1870 in. (3/16) Length of Cut x 1.5000 in. (1-1/2) Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 39508

0.1250 in. (1/8) Cutter Diameter x 0.0050 in. Radius x 0.1870 in. (3/16) Length of Cut x 1.5000 in. (1-1/2) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 39508-C3

0.0469 in. (3/64) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 39703

0.0469 in. (3/64) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 39703-C3

0.0625 in. (1/16) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 39704-C3

0.0625 in. (1/16) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 39704-HARVEY

0.0781 in. (5/64) Cutter Diameter x 0.1870 in. (3/16) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 39705-C3

0.0781 in. (5/64) Cutter Diameter x 0.1870 in. (3/16) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 39705-HARVEY

0.0938 in. Cutter Diameter x 0.3120 in. (5/16) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 39706-C3

0.0938 in. Cutter Diameter x 0.3120 in. (5/16) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 39706-HARVEY

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 39708

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 39708-C3

0.1560 in. Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 39710-C3