0.0470 in. (3/64) Cutter Diameter x 0.0380 in. Length of Cut x 5 Deg. 0.8410 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 996014

0.0470 in. (3/64) Cutter Diameter x 0.0380 in. Length of Cut x 5 Deg. 0.8410 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 996014-C8

0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut x 5 Deg. 0.7670 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 996021-C8

0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut x 5 Deg. 0.7670 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 996021-HARVEY

0.0780 in. (5/64) Cutter Diameter x 0.0620 in. (1/16) Length of Cut x 5 Deg. 1.0450 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 996028

0.0780 in. (5/64) Cutter Diameter x 0.0620 in. (1/16) Length of Cut x 5 Deg. 1.0450 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 996028-C8

0.0930 in. (3/32) Cutter Diameter x 0.0740 in. Length of Cut x 5 Deg. 0.9710 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 996035

0.0930 in. (3/32) Cutter Diameter x 0.0740 in. Length of Cut x 5 Deg. 0.9710 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 996035-C8

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 5 Deg. 0.8140 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 996042

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 5 Deg. 0.8140 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 996042-C8

0.1875 in. (3/16) Cutter Diameter x 0.1500 in. Length of Cut x 5 Deg. 1.2220 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 996087

0.1875 in. (3/16) Cutter Diameter x 0.1500 in. Length of Cut x 5 Deg. 1.2220 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 996087-C8

0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 5 Deg. 0.9140 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 996092

0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 5 Deg. 0.9140 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 996092-C8

0.1250 in. (1/8) Shank Diameter x 30 Deg. Included 2 Flute Carbide Marking Cutter

Item Code: 996108