41/64 Inch Diameter, Screw Machine Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 653-16.27

3.75mm Diameter Jobber Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Left Hand Cut

Item Code: 550-3.75

1 Inch Diameter Endmill, 1 Shank, 10 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0118 chamfer

Item Code: 3179-25.40

3/4 Inch Diameter, 7xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Whistle Notch Shank, 140° Point, Right Hand Cut

Item Code: 5612-19.05

5.8mm Diameter Screw Machine Drill, 2 flutes, HSS-E-PM, FIREX Coated, Straight Shank, 130° Point, Right Hand Cut

Item Code: 515-5.80

14mm Diameter Screw Machine Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 653-14.00

#19 Diameter, Taper Length Drill, 2 flutes, HSS, Bright Finish, Straight Shank, 130° Point, Right Hand Cut

Item Code: 501-4.22

7.5mm Diameter 3xD Drill, 2 flutes, Carbide, FIREX Coated, Straight Shank, 140° Point, Right Hand Cut

Item Code: 5514-7.50

8.3mm Diameter 3xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

Item Code: 5510-8.30

14.5mm Diameter Screw Machine Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 130° Point, Right Hand Cut

Item Code: 329-14.50

3/8-16 Tap, UNC thread, H5/H6, 3 flutes, HSS-E-PM, TiN Coated, 40° Spiral Flute

Item Code: 3910-9.525

1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0197 chamfer

Item Code: 3184-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Super A Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.004 chamfer

Item Code: 3874-12.70

25mm Diameter Endmill, 25mm shank, 10 flutes, 45mm Length of Cut, Carbide, FIREX Coated, HA Shank, 121mm Overal Length, 45° Helix Angle, 0.2 chamfer (mm)

Item Code: 3689-25.00

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, Bright Finish, HA Shank, 4 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3161-19.05