0.1250 in. (1/8) Cutter Diameter x 0.0150 in. (1/64) Width x 0.1870 in. (3/16) Neck Length 4 Flute TiB2 Coated Carbide Square Keyseat Cutter for Non-Ferrous

Item Code: 962915-C8

0.1250 in. (1/8) Cutter Diameter x 0.0310 in. (1/32) Width x 0.1870 in. (3/16) Neck Length 4 Flute Carbide Square Keyseat Cutter for Non-Ferrous

Item Code: 962931

0.1250 in. (1/8) Cutter Diameter x 0.0310 in. (1/32) Width x 0.1870 in. (3/16) Neck Length 4 Flute TiB2 Coated Carbide Square Keyseat Cutter for Non-Ferrous

Item Code: 962931-C8

0.1250 in. (1/8) Cutter Diameter x 0.0620 in. (1/16) Width x 0.1870 in. (3/16) Neck Length 4 Flute TiB2 Coated Carbide Square Keyseat Cutter for Non-Ferrous

Item Code: 962962-C8

0.1250 in. (1/8) Cutter Diameter x 0.0930 in. (3/32) Width x 0.1870 in. (3/16) Neck Length 4 Flute Carbide Square Keyseat Cutter for Non-Ferrous

Item Code: 962993

0.1250 in. (1/8) Cutter Diameter x 0.0930 in. (3/32) Width x 0.1870 in. (3/16) Neck Length 4 Flute TiB2 Coated Carbide Square Keyseat Cutter for Non-Ferrous

Item Code: 962993-C8

0.0150 in. (1/64) Cutter Diameter x 0.0230 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 963015-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 963020-C3

0.0310 in. (1/32) Cutter Diameter x 0.0470 in. (3/64) Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 963031-C3

0.0470 in. (3/64) Cutter Diameter x 0.0710 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 963047-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 963062-C3

0.0780 in. (5/64) Cutter Diameter x 0.1180 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 963078-C3

0.0930 in. (3/32) Cutter Diameter x 0.1400 in. (9/64) Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 963093-C3

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 963108-C3

0.1562 in. (5/32) Cutter Diameter x 0.2350 in. Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 963110-C3