0.75mm Diameter Taper Length Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-0.750

0.8mm Diameter Taper Length Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-0.800

0.85mm Diameter Taper Length Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-0.850

0.9mm Diameter Taper Length Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-0.900

7/16 Inch Diameter Endmill, 7/16 Shank, 3 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3170-11.110

1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3170-12.700

9/16 Inch Diameter Endmill, 9/16 Shank, 3 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3170-14.290

5/8 Inch Diameter Endmill, 5/8 Shank, 3 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3170-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 3 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3170-19.050

1/8 Inch Diameter Endmill, 1/8 Shank, 3 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3170-3.170

3/16 Inch Diameter Endmill, 3/16 Shank, 3 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3170-4.760

1/4 Inch Diameter Endmill, 1/4 Shank, 3 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3170-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 3 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3170-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 3 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3170-9.520

1mm Diameter Taper Length Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-1.000