0.3750 in. (3/8) Cutter Diameter x 0.1560 in. (5/32) Width x 0.5620 in. (9/16) Neck Length 8 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22565-C3 HARVEY

0.0625 in. (1/16) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 23104-C3

0.0310 in. (1/32) Cutter Diameter x 0.0930 in. (3/32) Length of Cut 2 Flute TiB2 Coated Carbide 45 Deg. Helix Ball End Mill

Item Code: 27831-C8

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 2 Flute Amorphous Diamond Coated Carbide Ball End Mill

Item Code: 74199-C4

0.0150 in. (1/64) Cutter Diameter x 0.0780 in. (5/64) Length of Cut 3 Flute Amorphous Diamond Coated Carbide Ball End Mill

Item Code: 32215-C4

0.0780 in. (5/64) Cutter Diameter x 0.1180 in. Length of Cut x 0.4060 in. (13/32) Reach 3 Flute Carbide Square End Mill

Item Code: 33278

0.1000 in. Cutter Diameter x 0.1500 in. Length of Cut x 0.8000 in. Reach 3 Flute Carbide Square End Mill

Item Code: 34700-HARVEY

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Radius x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 4 Flute 9 Micrometer CVD Diamond Coated Carbide Corner Radius End Mill

Item Code: 66562

0.1250 in. (1/8) Shank Diameter x 0.0100 in. Radius x 60 Deg. Included 1 Flute AlTiN Coated Carbide Radius Engraver

Item Code: 49410-C3

0.0400 in. Cutter Diameter x 0.1200 in. Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 74040

0.3750 in. (3/8) Cutter Diameter x 0.8750 in. (7/8) Length of Cut x 82 Deg. Included Mill Style 4 Flute AlTiN Coated Carbide Drill/End Mill

Item Code: 26524-C3

0.0700 in. Cutter Diameter x 0.0100 in. Radius x 0.2100 in. Length of Cut 4 Flute Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 27270-C4

0.0310 in. (1/32) Cutter Diameter x 0.0050 in. Radius x 0.0470 in. (3/64) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52231-C6

0.0150 in. (1/64) Cutter Diameter x 0.0450 in. Length of Cut 2 Flute Amorphous Diamond Coated Carbide Ball End Mill

Item Code: 74015-C4

0.0150 in. (1/64) Cutter Diameter x 0.0030 in. Radius x 0.0450 in. Length of Cut 4 Flute Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 47215-C4