0.0900 in. Cutter Diameter x 0.0050 in. Radius x 0.1350 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 993890-C3

1.0000 in. (1) Cutter Diameter x 0.0781 in. (5/64) Radius 6 Flute AlTiN Coated Carbide Full Radius Reduced Shank Keyseat Cutter

Item Code: 32905-C3

0.1250 in. (1/8) Cutter Diameter x 1.0000 in. (1) Length of Cut 5 Flute AlTiN Coated Carbide V-Helix Square Finisher End Mill

Item Code: 983708-C3

0.5000 in. (1/2) Cutter Diameter x 0.0100 in. Radius x 0.0930 in. (3/32) Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Corner Radius Stagger Keyseat Cutter

Item Code: 44650-C3

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.1400 in. (9/64) Length of Cut x 1.4000 in. Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 968993-C6

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.1400 in. (9/64) Length of Cut x 1.1250 in. (1-1/8) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 63093-C6

2.381 mm Drill Diameter x 33.000 mm Flute Length 2 Flute AlTiN Coated Carbide Miniature High Performance Drill

Item Code: CHT0937-C3

0.0150 in. (1/64) Cutter Diameter x 0.0450 in. Length of Cut 4 Flute Amorphous Diamond Coated Carbide Ball End Mill

Item Code: 74315-C4

0.0650 in. Cutter Diameter x 0.0970 in. Length of Cut x 0.8000 in. Reach 3 Flute Carbide Square End Mill

Item Code: 35465

0.400 mm Cutter Diameter x 0.080 mm Radius x 0.600 mm Length of Cut x 2.000 mm Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 986709-C3

0.0250 in. Cutter Diameter x 0.0040 in. Radius x 0.0380 in. Length of Cut x 0.1250 in. (1/8) Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 62425-C3

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Radius x 0.0500 in. Length of Cut x 0.3120 in. (5/16) Reach 4 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 996362-C6

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.3120 in. (5/16) Reach 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 947062-C8

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 989816-C8

0.1562 in. (5/32) Cutter Diameter x 1.0000 in. (1) Length of Cut 4 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 12610-C3