63/64 Inch Diameter, Spot Drill, 2 flutes, HSS, Bright Finish, Straight Shank, 90° Point, Right Hand Cut

Item Code: 557-25.00

3/8-16 PowerTap, UNC thread, H3, 3 flutes, HSS-E, Steam Oxide Coated

Item Code: 4402-9.525

35.005mm Diameter 5xD Drill, 2 flutes, tool steel, nickel-plated Coated, with Coolant, Whistle Notch Shank, Right Hand Cut

Item Code: 4108-35.005

1-3/8 Inch Diameter, Drill Body, 2 flutes, Carbide, FIREX Coated, 140° Point, Right Hand Cut

Item Code: 4112-34.93

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 1-1/2 Overall Length, 36/38° Helix Angle, 0.004 chamfer

Item Code: 3080-3.17

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 40° Helix Angle, 0.0059 chamfer

Item Code: 4258-4.760

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, 1-3/4 Reach, Carbide, nano-A Coated, HA/HB Shank, 3-1/4 Overall Length, 36/38° Helix Angle, 0.0098 chamfer

Item Code: 4260-6.35

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, 1-3/4 Reach, Carbide, nano-A Coated, HA/HB Shank, 3-1/4 Overall Length, 36/38° Helix Angle, 0.0098 chamfer

Item Code: 4260-7.940

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 55° Helix Angle, 0.0039 chamfer

Item Code: 3182-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 6 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 55° Helix Angle, 0.0039 chamfer

Item Code: 3182-7.940

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, 1-1/2 Reach, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 55° Helix Angle, 0.0039 chamfer

Item Code: 3183-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 6 flutes, 7/8 Length of Cut, 1-1/2 Reach, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 55° Helix Angle, 0.0039 chamfer

Item Code: 3183-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 7/8 Length of Cut, 1-1/2 Reach, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 55° Helix Angle, 0.0039 chamfer

Item Code: 3183-9.520

14.8mm Diameter 5xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

Item Code: 5511-14.80

5/64 Inch Diameter, Jobber Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 5519-1.98