0.3750 in. (3/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.5630 in. Length of Cut 4 Flute AlTiN Coated Carbide Reduce Shank Corner Radius End Mill

Item Code: 829024-C3

0.4375 in. (7/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.6560 in. (21/32) Length of Cut 4 Flute Carbide Reduce Shank Corner Radius End Mill

Item Code: 829028

0.4375 in. (7/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.6560 in. (21/32) Length of Cut 4 Flute AlTiN Coated Carbide Reduce Shank Corner Radius End Mill

Item Code: 829028-C3

0.5000 in. (1/2) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.7500 in. (3/4) Length of Cut 4 Flute Carbide Reduce Shank Corner Radius End Mill

Item Code: 829032

0.5000 in. (1/2) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Reduce Shank Corner Radius End Mill

Item Code: 829032-C3

0.0310 in. (1/32) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.4700 in. Reach 2 Flute Carbide Square End Mill

Item Code: 829131

0.0310 in. (1/32) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.4700 in. Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 829131-C3

0.0620 in. (1/16) Cutter Diameter x 0.1860 in. Length of Cut x 0.9500 in. Reach 2 Flute Carbide Square End Mill

Item Code: 829162

0.0620 in. (1/16) Cutter Diameter x 0.1860 in. Length of Cut x 0.9500 in. Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 829162-C3

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut x 1.4000 in. Reach 2 Flute Carbide Square End Mill

Item Code: 829193

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut x 1.4000 in. Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 829193-C3

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 1.8750 in. (1-7/8) Reach 2 Flute Carbide Square End Mill

Item Code: 829208

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 1.8750 in. (1-7/8) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 829208-C3

0.1250 in. (1/8) Shank Diameter x 0.0150 in. (1/64) Flat x 60 Deg. Included 1 Flute Carbide Tipped Engraver De

Item Code: 829308

0.1250 in. (1/8) Shank Diameter x 0.0150 in. (1/64) Flat x 60 Deg. Included 1 Flute AlTiN Coated Carbide Tipped Engraver De

Item Code: 829308-C3