3.000 mm Cutter Diameter x 15.000 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 974557-C6

0.3125 in. (5/16) Cutter Diameter x 0.0620 in. (1/16) Width x 0.3750 in. (3/8) Neck Length 6 Flute Carbide Square Deep Keyseat Cutter

Item Code: 907930

0.3750 in. (3/8) Cutter Diameter x 0.0100 in. Radius x 0.2500 in. (1/4) Neck Length x 60 Deg. Included 3 Flute AlTiN Coated Carbide Tip Radius Dovetail Cutter

Item Code: 925324-C3

0.0850 in. Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1000 in. Length Of Cut 3 Flute Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56520

0.0930 in. (3/32) Cutter Diameter x 0.5000 in. (1/2) Length of Cut 3 Flute Carbide V-Helix Square End Mill

Item Code: 923093

0.1090 in. (7/64) Cutter Diameter x 0.0050 in. Radius x 0.3270 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 72902-C3

1.0000 in. (1) Cutter Diameter x 0.0312 in. (1/32) Radius 6 Flute AlTiN Coated Carbide Full Radius Reduced Shank Keyseat Cutter

Item Code: 942631-C3

0.0620 in. (1/16) Cutter Diameter x 0.0080 in. Radius x 0.0930 in. (3/32) Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 913762

0.0980 in. (2.5 mm) Cutter Diameter x 0.6250 in. (5/8) Reach 4 Flute AlTiN Coated Carbide Single Form #6 Thread Milling Cutter

Item Code: 993920-C3

2.286 mm Drill Diameter x 15.000 mm Flute Length 2 Flute Amorphous Diamond Coated Carbide Miniature High Performance Drill

Item Code: DDA0900-C4

3.175 mm Drill Diameter x 21.000 mm Flute Length 2 Flute Amorphous Diamond Coated Carbide Miniature High Performance Drill

Item Code: DDA1250-C4

0.1250 in. (1/8) Shank Diameter x 20 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Doubled-Ended Chamfer Cutter

Item Code: 988420-C3

0.1180 in. (3 mm) Cutter Diameter x 0.1770 in. Length of Cut x 1.1870 in. (1-3/16) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 982205-C3

0.1350 in. Head Diameter x 0.6250 in. (5/8) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Deburring Mill

Item Code: 65820-C3

0.0625 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 951162-C3