0.0200 in. (.5 mm) Drill Diameter x 0.0600 in. Flute Length 60 Deg. 2 Flute AlTiN Coated Carbide Spot Drill

Item Code: 932720-C3

0.0450 in. Drill Diameter x 0.1350 in. Flute Length 60 Deg. 2 Flute Carbide Spot Drill

Item Code: 932745

0.0450 in. Drill Diameter x 0.1350 in. Flute Length 60 Deg. 2 Flute AlTiN Coated Carbide Spot Drill

Item Code: 932745-C3

0.1250 in. (1/8) Drill Diameter x 0.3750 in. (3/8) Flute Length 60 Deg. 2 Flute Carbide Spot Drill

Item Code: 932811

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Neck Length x 300 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 933024

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Neck Length x 300 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 933024-C3

0.5000 in. (1/2) Cutter Diameter x 0.0200 in. Radius x 0.0620 in. (1/16) Width x 0.7500 in. (3/4) Neck Length 8 Flute Carbide Corner Radius Keyseat Cutter

Item Code: 933730

0.5000 in. (1/2) Cutter Diameter x 0.0200 in. Radius x 0.0620 in. (1/16) Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Corner Radius Keyseat Cutter

Item Code: 933730-C3

0.5000 in. (1/2) Cutter Diameter x 0.0200 in. Radius x 0.0930 in. (3/32) Width x 0.7500 in. (3/4) Neck Length 8 Flute Carbide Corner Radius Keyseat Cutter

Item Code: 933750

0.5000 in. (1/2) Cutter Diameter x 0.0200 in. Radius x 0.0930 in. (3/32) Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Corner Radius Keyseat Cutter

Item Code: 933750-C3

0.5000 in. (1/2) Cutter Diameter x 0.0200 in. Radius x 0.1250 in. (1/8) Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Corner Radius Keyseat Cutter

Item Code: 933760-C3

0.5000 in. (1/2) Cutter Diameter x 0.0200 in. Radius x 0.1870 in. (3/16) Width x 0.7500 in. (3/4) Neck Length 8 Flute Carbide Corner Radius Keyseat Cutter

Item Code: 933770

0.5000 in. (1/2) Cutter Diameter x 0.0200 in. Radius x 0.1870 in. (3/16) Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Corner Radius Keyseat Cutter

Item Code: 933770-C3

0.3750 in. (3/8) Shank Diameter x 50 Deg. Per Side 3 Flute Carbide Flat Doubled-Ended Chamfer Cutter

Item Code: 934050

0.3750 in. (3/8) Shank Diameter x 50 Deg. Per Side 3 Flute AlTiN Coated Carbide Flat Doubled-Ended Chamfer Cutter

Item Code: 934050-C3