0.1250 in. (1/8) Shank Diameter x 90 Deg. Included 2 Flute AlTiN Coated Carbide Marking Cutter

Item Code: 914608-C3

0.0980 in. (2.5 mm) Cutter Diameter x 0.5000 in. (1/2) Reach 4 Flute AlTiN Coated Carbide Single Form #6 Thread Milling Cutter

Item Code: 54220-C3

3.454 mm Drill Diameter x 23.000 mm Flute Length 2 Flute Amorphous Diamond Coated Carbide Miniature High Performance Drill

Item Code: DDA1360-C4

0.0200 in. Radius x 0.1070 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 68020-HARVEY

0.0780 in. (5/64) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.6250 in. (5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 888278-C3

0.1250 in. (1/8) Cutter Diameter x 0.6250 in. (5/8) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 922908

0.0250 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 45325

0.3000 in. Cutter Diameter x 1.7500 in. (1-3/4) Reach 4 Flute AlTiN Coated Carbide Single Form #3/8 Thread Milling Cutter

Item Code: 901260-C3

0.5000 in. (1/2) Cutter Diameter x 0.0620 in. (1/16) Width x 0.2500 in. (1/4) Neck Length 8 Flute AlTiN Coated Carbide Square Deep Keyseat Cutter

Item Code: 71230-C3

0.3125 in. (5/16) Cutter Diameter x 0.1000 in. Width x 0.4680 in. (15/32) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22452-C3

0.0370 in. Drill Diameter x 0.3950 in. Flute Length 2 Flute AlTiN Coated Carbide Miniature Drill

Item Code: 20275-C3

0.0390 in. (1 mm) Cutter Diameter x 0.0310 in. (1/32) Length of Cut x 1.5 Deg. 0.4880 in. Taper Reach 2 Flute AltiN Nano Coated Carbide Ball End Mill for Medium Alloy Steels

Item Code: 19025-C6

0.0394 in. (1 mm) Cutter Diameter x 0.0470 in. (3/64) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 2311M-C3

0.0780 in. (5/64) Cutter Diameter x 0.4060 in. (13/32) Length of Cut 3 Flute Carbide Square End Mill

Item Code: 31878-HARVEY

0.1250 in. (1/8) Cutter Diameter x 0.0360 in. Width x 0.3120 in. (5/16) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 984401-C3