M12X1.75 Tap, metric thread, D5/D6, 3 flutes, HSS-E, TiCN Coated, 40° Spiral Flute

Item Code: 3948-12.00

M16X2 Tap, metric thread, D6/D7, 4 flutes, HSS-E, TiCN Coated, 40° Spiral Flute

Item Code: 3948-16.00

8.8mm Diameter Screw Machine Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 5520-8.80

V Diameter, Taper Length Drill, 2 flutes, HSCO, Bright Finish, Straight Shank, 130° Point, Right Hand Cut

Item Code: 617-9.58

0.26mm Diameter Micro Drill, 2 flutes, HSS-E-PM, TiN Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 660-0.26

S Diameter, Jobber Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 5519-8.84

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4-1/2 Overall Length, 40° Helix Angle, 0.0157 chamfer

Item Code: 4258-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, 2-1/2 Reach, Carbide, nano-A Coated, HA/HB Shank, 4-1/2 Overall Length, 36/38° Helix Angle, 0.0157 chamfer

Item Code: 4260-12.70

3/8-16 Tap, UNC thread, H5/H6, 3 flutes, HSS-E, Moly Glide Coated

Item Code: 3967-9.525

8.1mm Diameter Screw Machine Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 552-8.10

7.7mm Diameter Screw Machine Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 552-7.70

3/8 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3150-9.52

M5X.8 Tap, metric thread, D3/D4, 3 flutes, HSS-E, TiCN Coated

Item Code: 3945-5.00

5/16 Inch Diameter Endmill, 5/16 Shank, 6 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 44/45/46° Helix Angle, 0.0039 chamfer

Item Code: 3115-7.94

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.01 chamfer

Item Code: 3080-6.35