0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute AlTiN Nano Coated Carbide Square End Mill

Item Code: 26662-C6

0.0780 in. (5/64) Cutter Diameter x 0.1180 in. Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute Carbide Square End Mill

Item Code: 26678

0.0780 in. (5/64) Cutter Diameter x 0.1180 in. Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute AlTiN Nano Coated Carbide Square End Mill

Item Code: 26678-C6

0.0930 in. (3/32) Cutter Diameter x 0.1400 in. (9/64) Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute Carbide Square End Mill

Item Code: 26693

0.0930 in. (3/32) Cutter Diameter x 0.1400 in. (9/64) Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute AlTiN Nano Coated Carbide Square End Mill

Item Code: 26693-C6

0.1560 in. (5/32) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute AlTiN Nano Coated Carbide Square End Mill

Item Code: 26710-C6

0.1560 in. (5/32) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute Carbide Square End Mill

Item Code: 26710-HARVEY

0.1875 in. (3/16) Cutter Diameter x 0.0930 in. (3/32) Width x 1.3120 in. (1-5/16) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 26802-C3

0.1875 in. (3/16) Cutter Diameter x 0.0930 in. (3/32) Width x 1.3120 in. (1-5/16) Neck Length 4 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 26802-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.1250 in. (1/8) Width x 1.7500 in. (1-3/4) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 26803-C3

0.3750 in. (3/8) Cutter Diameter x 0.1250 in. (1/8) Width x 2.3120 in. (2-5/16) Neck Length 6 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 26805-HARVEY

0.5000 in. (1/2) Cutter Diameter x 0.1870 in. (3/16) Width x 2.6250 in. (2-5/8) Neck Length 6 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 26810

0.5000 in. (1/2) Cutter Diameter x 0.1870 in. (3/16) Width x 2.6250 in. (2-5/8) Neck Length 6 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 26810-C3

0.1562 in. (5/32) Cutter Diameter x 0.0780 in. (5/64) Width x 1.1250 in. (1-1/8) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 26856-C3

0.1562 in. (5/32) Cutter Diameter x 0.0780 in. (5/64) Width x 1.1250 in. (1-1/8) Neck Length 4 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 26856-HARVEY