0.0700 in. Radius x 0.3750 in. (3/8) Head Diameter x 0.8750 in. (7/8) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16070-HARVEY

0.0780 in. (5/64) Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16078-C3

0.0780 in. (5/64) Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16078-HARVEY

0.0800 in. Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16080-C3

0.0900 in. Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16090-C3

0.0900 in. Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16090-HARVEY

0.0930 in. (3/32) Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16093-C3

0.1000 in. Radius x 0.5000 in. (1/2) Head Diameter x 1.0000 in. (1) Neck Length 4 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16100-C3

0.1250 in. (1/8) Radius x 0.5000 in. (1/2) Head Diameter x 1.0000 in. (1) Neck Length 4 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16108-C3

0.1560 in. (5/32) Radius x 0.6250 in. (5/8) Head Diameter x 1.0000 in. (1) Neck Length 4 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16110-HARVEY

0.1870 in. (3/16) Radius x 0.6250 in. (5/8) Head Diameter x 1.0000 in. (1) Neck Length 4 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16112-C3

0.1870 in. (3/16) Radius x 0.6250 in. (5/8) Head Diameter x 1.0000 in. (1) Neck Length 4 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16112-HARVEY

0.1180 in. Radius x 0.5000 in. (1/2) Head Diameter x 1.0000 in. (1) Neck Length 4 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 1613M

0.1180 in. Radius x 0.5000 in. (1/2) Head Diameter x 1.0000 in. (1) Neck Length 4 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 1613M-C3

0.1250 in. (1/8) Cutter Diameter x 0.0360 in. Width x 0.1870 in. (3/16) Neck Length 4 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 16201-HARVEY